Íîðìàòèâíûå äîêóìåíòû ðàçìåùåíû èñêëþ÷èòåëüíî ñ öåëüþ îçíàêîìëåíèÿ ó÷àùèõñÿ ÂÓÇîâ, òåõíèêóìîâ è ó÷èëèù.
Îáúÿâëåíèÿ:

ÃÎÑÓÄÀÐÑÒÂÅÍÍÛÉ ÑÒÀÍÄÀÐÒ ÑÎÞÇÀ ÑÑÐ

ÈÇÄÅËÈß ÊÐÅÏÅÆÍÛÅ

ÒÅÐÌÈÍÛ È ÎÏÐÅÄÅËÅÍÈß

ÃÎÑÒ 27017-86

(ÑÒ ÑÝÂ 6300-88)

ÃÎÑÓÄÀÐÑÒÂÅÍÍÛÉ ÊÎÌÈÒÅÒ ÑÑÑÐ ÏÎ ÓÏÐÀÂËÅÍÈÞ
ÊÀ×ÅÑÒÂÎÌ ÏÐÎÄÓÊÖÈÈ È ÑÒÀÍÄÀÐÒÀÌ

Ìîñêâà

ÃÎÑÓÄÀÐÑÒÂÅÍÍÛÉ ÑÒÀÍÄÀÐÒ ÑÎÞÇÀ ÑÑÐ

ÈÇÄÅËÈß ÊÐÅÏÅÆÍÛÅ

Òåðìèíû è îïðåäåëåíèÿ

Fasteners. Terms and definitions

ÃÎÑÒ
27017-86

(ÑÒ ÑÝÂ 6300-88)

Äàòà ââåäåíèÿ 01.01.88

Íàñòîÿùèé ñòàíäàðò óñòàíàâëèâàåò òåðìèíû è îïðåäåëåíèÿ îñíîâíûõ ïîíÿòèé âèäîâ êðåïåæíûõ èçäåëèé îáùåìàøèíîñòðîèòåëüíîãî ïðèìåíåíèÿ, èõ êîíñòðóêòèâíûõ ýëåìåíòîâ.

Òåðìèíû, óñòàíîâëåííûå íàñòîÿùèì ñòàíäàðòîì, îáÿçàòåëüíû äëÿ ïðèìåíåíèÿ âî âñåõ âèäàõ äîêóìåíòàöèè è ëèòåðàòóðû, âõîäÿùèõ â ñôåðó äåéñòâèÿ ñòàíäàðòèçàöèè èëè èñïîëüçóþùèõ ðåçóëüòàòû ýòîé äåÿòåëüíîñòè.

Íàñòîÿùèé ñòàíäàðò äîëæåí ïðèìåíÿòüñÿ ñîâìåñòíî ñ ÃÎÑÒ 11708.

Äëÿ êàæäîãî ïîíÿòèÿ óñòàíîâëåí îäèí ñòàíäàðòèçîâàííûé òåðìèí. Ïðèìåíåíèå òåðìèíîâ - ñèíîíèìîâ ñòàíäàðòèçîâàííîãî òåðìèíà íå äîïóñêàåòñÿ. Íåäîïóñòèìûå ê ïðèìåíåíèþ òåðìèíû-ñèíîíèìû ïðèâåäåíû â ñòàíäàðòå â êà÷åñòâå ñïðàâî÷íûõ è îáîçíà÷åíû ïîìåòîé «Íäï».

Äëÿ îòäåëüíûõ ñòàíäàðòèçîâàííûõ òåðìèíîâ â ñòàíäàðòå ïðèâåäåíû â êà÷åñòâå ñïðàâî÷íûõ êðàòêèå ôîðìû, êîòîðûå ðàçðåøàåòñÿ ïðèìåíÿòü â ñëó÷àÿõ, èñêëþ÷àþùèõ âîçìîæíîñòü èõ ðàçëè÷íîãî òîëêîâàíèÿ.

Ïðèâåäåííûå îïðåäåëåíèÿ ìîæíî, ïðè íåîáõîäèìîñòè, èçìåíÿòü, ââîäÿ â íèõ ïðîèçâîäíûå ïðèçíàêè, ðàñêðûâàÿ çíà÷åíèå èñïîëüçóåìûõ â íèõ òåðìèíîâ, óêàçûâàÿ îáúåêòû, âõîäÿùèå â îáúåì îïðåäåëÿåìîãî ïîíÿòèÿ. Èçìåíåíèÿ íå äîëæíû íàðóøàòü îáúåì è ñîäåðæàíèå ïîíÿòèé, îïðåäåëåííûõ â äàííîì ñòàíäàðòå.

 ñòàíäàðòå â êà÷åñòâå ñïðàâî÷íûõ ïðèâåäåíû èíîÿçû÷íûå ýêâèâàëåíòû äëÿ ðÿäà ñòàíäàðòèçîâàííûõ òåðìèíîâ íà íåìåöêîì (D), àíãëèéñêîì (E), ôðàíöóçñêîì (F) ÿçûêàõ.

 ñòàíäàðòå ïðèâåäåíû àëôàâèòíûå óêàçàòåëè ñîäåðæàùèõñÿ â íåì òåðìèíîâ íà ðóññêîì ÿçûêå è èõ èíîÿçû÷íûõ ýêâèâàëåíòîâ.

Ñòàíäàðòèçîâàííûå òåðìèíû íàáðàíû ïîëóæèðíûì øðèôòîì, èõ êðàòêàÿ ôîðìà - ñâåòëûì, à íåäîïóñòèìûå ñèíîíèìû - êóðñèâîì.

 ñòàíäàðòå ïðèâåäåíî ïðèëîæåíèå, ñîäåðæàùåå òåðìèíîëîãèþ è íîìåíêëàòóðó êðåïåæíûõ èçäåëèé íà ðóññêîì, íåìåöêîì, àíãëèéñêîì è ôðàíöóçñêîì ÿçûêàõ.

(Èçìåíåííàÿ ðåäàêöèÿ, Èçì. ¹ 1).

Òåðìèí

Îïðåäåëåíèå

 

ÎÁÙÈÅ ÏÎÍßÒÈß

 

1. Êðåïåæíîå èçäåëèå

Äåòàëü äëÿ îáðàçîâàíèÿ ñîåäèíåíèÿ

E. Fastener

2. Áîëò

Êðåïåæíîå èçäåëèå â ôîðìå ñòåðæíÿ ñ íàðóæíîé ðåçüáîé íà îäíîì êîíöå, ñ ãîëîâêîé íà äðóãîì, îáðàçóþùåå ñîåäèíåíèå ïðè ïîìîùè ãàéêè èëè ðåçüáîâîãî îòâåðñòèÿ â îäíîì èç ñîåäèíÿåìûõ èçäåëèé

D. Schraube

E. Bolt

F. Boulon

3. Âèíò

Êðåïåæíîå èçäåëèå äëÿ îáðàçîâàíèÿ ñîåäèíåíèÿ èëè ôèêñàöèè, âûïîëíåííîå â ôîðìå ñòåðæíÿ ñ íàðóæíîé ðåçüáîé íà îäíîì êîíöå è êîíñòðóêòèâíûì ýëåìåíòîì äëÿ ïåðåäà÷è êðóòÿùåãî ìîìåíòà íà äðóãîì.

D. Schraube

Å. Screw

F. Vis

Ïðèìå÷àíèå. Êîíñòðóêòèâíûé ýëåìåíò âèíòà äëÿ ïåðåäà÷è êðóòÿùåãî ìîìåíòà ìîæåò ïðåäñòàâëÿòü ãîëîâêó ñî øëèöåì, ãîëîâêó ñ íàêàòêîé èëè, ïðè îòñóòñòâèè ãîëîâêè, øëèö â òîðöå ñòåðæíÿ

4. Øóðóï

Êðåïåæíîå èçäåëèå â ôîðìå ñòåðæíÿ ñ íàðóæíîé ñïåöèàëüíîé ðåçüáîé, ðåçüáîâûì êîíè÷åñêèì êîíöîì è ãîëîâêîé íà äðóãîì êîíöå, îáðàçóþùåå ðåçüáó â îòâåðñòèè ñîåäèíÿåìîãî äåðåâÿííîãî èëè ïëàñòìàññîâîãî èçäåëèÿ.

D. Holzschraube

Å. Wood screw

Ïðèìå÷àíèå. Ñïåöèàëüíàÿ ðåçüáà èìååò òðåóãîëüíûé çàîñòðåííûé ïðîôèëü è áîëüøóþ øèðèíó âïàäèíû ïî ñðàâíåíèþ ñ øèðèíîé çóáà

F. Vis à bois

5. Øïèëüêà

Êðåïåæíîå èçäåëèå â ôîðìå öèëèíäðè÷åñêîãî ñòåðæíÿ ñ íàðóæíîé ðåçüáîé íà îáîèõ êîíöàõ èëè íà âñåé äëèíå ñòåðæíÿ

D. Stiftschraube

Å. Stud

F. Goujon

6. Øòèôò

Êðåïåæíîå èçäåëèå â ôîðìå öèëèíäðè÷åñêîãî èëè êîíè÷åñêîãî ñòåðæíÿ äëÿ ôèêñàöèè èçäåëèé ïðè ñáîðêå

D. Stift

Å. Pin

F. Goupille

7. Ãàéêà

Êðåïåæíîå èçäåëèå ñ ðåçüáîâûì îòâåðñòèåì êîíñòðóêòèâíûì ýëåìåíòîì äëÿ ïåðåäà÷è êðóòÿùåãî ìîìåíòà.

D. Mutter

Å. Nut

Ïðèìå÷àíèå. Êîíñòðóêòèâíûì ýëåìåíòîì ãàéêè äëÿ ïåðåäà÷è êðóòÿùåãî ìîìåíòà ìîæåò áûòü ìíîãîãðàííèê, íàêàòêà íà áîêîâîé ïîâåðõíîñòè, òîðöåâûå è ðàäèàëüíûå îòâåðñòèÿ, øëèöû è ò.ä.

F. Ecrou

8. Øàéáà

Êðåïåæíîå èçäåëèå ñ îòâåðñòèåì, ïîäêëàäûâàåìîå ïîä ãàéêó èëè ãîëîâêó áîëòà èëè âèíòà äëÿ óâåëè÷åíèÿ îïîðíîé ïîâåðõíîñòè è (èëè) ïðåäîòâðàùåíèÿ èõ ñàìîîòâèí÷èâàíèÿ

D. Scheibe

E. Washer

F. Rondelle

9. Øïëèíò

Êðåïåæíîå èçäåëèå â ôîðìå ïðîâîëî÷íîãî ñòåðæíÿ ïîëóêðóãëîãî ñå÷åíèÿ, ñëîæåííîãî âäâîå ñ îáðàçîâàíèåì ãîëîâêè

D. Splint

Å. Split pin

F. Goupille

10. Çàêëåïêà

Êðåïåæíîå èçäåëèå â ôîðìå ãëàäêîãî öèëèíäðè÷åñêîãî ñòåðæíÿ ñ ãîëîâêîé íà îäíîì êîíöå, ñëóæàùåå äëÿ ïîëó÷åíèÿ íåðàçúåìíîãî ñîåäèíåíèÿ çà ñ÷åò îáðàçîâàíèÿ ãîëîâêè íà äðóãîì êîíöå ñòåðæíÿ ïëàñòè÷åñêîé äåôîðìàöèåé

D. Niet

Å. Rivet

F. Rivet

ÂÈÄÛ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ

11. Ñòóïåí÷àòûé áîëò

Áîëò, äèàìåòð ãëàäêîé ÷àñòè ñòåðæíÿ êîòîðîãî ïðåâûøàåò íîìèíàëüíûé äèàìåòð ðåçüáû

D. Schraube rnit Ansatzschaft

Å. Shoulder bolt

F. Corps de boulon renforcée

12. Îòêèäíîé áîëò

Áîëò, ãîëîâêà êîòîðîãî âûïîëíåíà â âèäå ïîäâèæíîé ÷àñòè øàðíèðíîãî ñîåäèíåíèÿ

D. Augenschraube

Å. Eye bolt

F. Corps de boulon à oeil

13. Ïðèçîííûé áîëò

Áîëò, äèàìåòð ãëàäêîé ÷àñòè ñòåðæíÿ êîòîðîãî îïðåäåëÿþò èç óñëîâèÿ îáåñïå÷åíèÿ ðàáîòû ñîåäèíåíèÿ íà ñðåç

Íäï. Áîëò äëÿ îòâåðñòèé èç-ïîä ðàçâåðòêè

D. Paßschraube

Å. Fit bolt

F. Corps de boulon ajustable

14. Ôóíäàìåíòíûé áîëò

Áîëò, ñî ñïåöèàëüíîé ôîðìîé ãîëîâêè, ñëóæàùèé äëÿ êðåïëåíèÿ îáîðóäîâàíèÿ ê ôóíäàìåíòó.

D. Steinschraube

Å. Foundation holt

Ïðèìå÷àíèå. Ñïåöèàëüíàÿ ôîðìà ãîëîâêè ìîæåò ïðåäñòàâëÿòü ðàçäâèíóòûå ëàïêè ïðîðåçíîé ÷àñòè ñòåðæíÿ, îòîãíóòóþ ÷àñòü ñòåðæíÿ è ò.ä.

F. Tige de scellement

15. Íåâûïàäàþùèé âèíò

Âèíò, äèàìåòð ãëàäêîé ÷àñòè ñòåðæíÿ êîòîðîãî ìåíüøå âíóòðåííåãî äèàìåòðà ðåçüáû

D. Schraube mit Dehnschaft

Å. Screw with waisted shank

F. Vis à tige allégée

16. Ñàìîíàðåçàþùèé âèíò

Âèíò, îáðàçóþùèé ñïåöèàëüíóþ ðåçüáó â îòâåðñòèè îäíîãî èç ñîåäèíÿåìûõ ïëàñòìàññîâûõ èëè ìåòàëëè÷åñêèõ èçäåëèé

D. Blechschraube

Å. Self-tapping screw

F. Vis à tôle

17. Ñàìîñâåðëÿùèé ñàìîíàðåçàþùèé âèíò

Ñàìîíàðåçàþùèé âèíò ñ êîíöîì ôîðìû ñâåðëà

18. Óñòàíîâî÷íûé âèíò

Âèíò ñ êîíöîì ñïåöèàëüíîé ôîðìû, ñëóæàùèé äëÿ ôèêñàöèè èçäåëèé îòíîñèòåëüíî äðóã äðóãà

Å. Set screw

Ïðèìå÷àíèå. Ñïåöèàëüíàÿ ôîðìà êîíöà ìîæåò áûòü öèëèíäðè÷åñêîé, êîíè÷åñêîé, ïëîñêîé è ò.ä.

19. Ïðóæèííûé øòèôò

Öèëèíäðè÷åñêèé øòèôò òðóá÷àòîãî ñå÷åíèÿ ñ ïðîäîëüíûì ïàçîì ïî åãî äëèíå, ñâåðíóòîé èç ïðóæèííîé ñòàëè

20. Ïðîðåçíàÿ ãàéêà

Øåñòèãðàííàÿ ãàéêà ñ ðàäèàëüíî ðàñïîëîæåííûìè ïðîðåçÿìè ïîä øïëèíò ñî ñòîðîíû îäíîé èç òîðöåâûõ ïîâåðõíîñòåé

D. Kronenmutter

E. Hexagon slotted nut

F. Ecrou hexagonal à créneaux

21. Êîðîí÷àòàÿ ãàéêà

Øåñòèãðàííàÿ ãàéêà, ÷àñòü êîòîðîé âûïîëíåíà â âèäå öèëèíäðà ñ ðàäèàëüíî ðàñïîëîæåííûìè ïðîðåçÿìè ïîä øïëèíò

D. Kronenmutter

Å. Hexagon castle nut

F. Ecrou hexagonal à créneaux dégagés

22. Êîëïà÷êîâàÿ ãàéêà

Ãàéêà, ñî ñôåðè÷åñêîé è ïëîñêîé òîðöåâîé ïîâåðõíîñòÿìè è ãëóõèì ðåçüáîâûì îòâåðñòèåì

D. Hutmutter

Å. Acorn nut

F. Ecrou borgne à calotte

23. Ãàéêà-áàðàøåê

Ãàéêà ñ ïëîñêèìè âûñòóïàþùèìè ýëåìåíòàìè äëÿ ïåðåäà÷è êðóòÿùåãî ìîìåíòà

D. Flügelmutter

Å. Wing nut

F. Ecrou à oreilles

24. Ïëîñêàÿ øàéáà

Øàéáà ñ ïëîñêîé îïîðíîé ïîâåðõíîñòüþ

D. Scheibe

Å. Plain washer

F. Rondelle plate

25. Ïðóæèííàÿ øàéáà

Ðàçðåçíàÿ êðóãëàÿ øàéáà, êîíöû êîòîðîé ðàñïîëîæåíû â ðàçíûõ ïëîñêîñòÿõ, ñëóæàùàÿ äëÿ ïðåäîòâðàùåíèÿ ñàìîîòâèí÷èâàíèÿ êðåïåæíûõ èçäåëèé ïðè åå óïðóãîé äåôîðìàöèè ïîä íàãðóçêîé

Íäï. Øàéáà Ãðîâåðà

D. Federring

E. Spring washer

F. Rondelle élastique

26. Ñòîïîðíàÿ øàéáà

Øàéáà, ñëóæàùàÿ äëÿ ïðåäîòâðàùåíèÿ ñàìîîòâèí÷èâàíèÿ êðåïåæíûõ èçäåëèé ïðè ïîìîùè êîíñòðóêòèâíûõ ýëåìåíòîâ.

D. Scheibe mit Lappen oder Nasen

Å. Tab washer

Ïðèìå÷àíèå. Êîíñòðóêòèâíûìè ýëåìåíòàìè øàéáû ÿâëÿþòñÿ ëàïêè, íîñêè, çóáüÿ è ò.ä.

F. Frein d’écrou

27. Ïóñòîòåëàÿ çàêëåïêà

Çàêëåïêà ñî ñòåðæíåì òðóá÷àòîãî ñå÷åíèÿ

28. Ïîëóïóñòîòåëàÿ çàêëåïêà

Çàêëåïêà, êîíöåâàÿ ÷àñòü ñòåðæíÿ êîòîðîé èìååò òðóá÷àòîå ñå÷åíèå

ÝËÅÌÅÍÒÛ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ

29. Ñòåðæåíü êðåïåæíîãî èçäåëèÿ

×àñòü êðåïåæíîãî èçäåëèÿ, íåïîñðåäñòâåííî âõîäÿùàÿ â îòâåðñòèÿ ñîåäèíÿåìûõ èçäåëèé èëè ââåðòûâàåìàÿ â ìàòåðèàë îäíîãî èç íèõ

Ñòåðæåíü

30. Ãîëîâêà êðåïåæíîãî èçäåëèÿ

×àñòü êðåïåæíîãî èçäåëèÿ, èìåþùåãî ñòåðæåíü, ñëóæàùàÿ äëÿ ïåðåäà÷è êðóòÿùåãî ìîìåíòà è (èëè) îáðàçîâàíèÿ îïîðíîé ïîâåðõíîñòè

Ãîëîâêà

D. Kopf

E. Head

F. Tête

31. Ïîäãîëîâîê áîëòà

Ãëàäêàÿ ÷àñòü ñòåðæíÿ áîëòà öèëèíäðè÷åñêîé, îâàëüíîé èëè êâàäðàòíîé ôîðìû, íåïîñðåäñòâåííî ïðèìûêàþùàÿ ê ãîëîâêå è ñëóæàùàÿ äëÿ öåíòðèðîâàíèÿ áîëòà èëè ïðåäîòâðàùåíèÿ åãî ïðîâîðà÷èâàíèÿ

Ïîäãîëîâîê

D. Ansatz

E. Neck

F. Collet

32. Áóðò êðåïåæíîãî èçäåëèÿ

Âûñòóï íà îïîðíîé ïîâåðõíîñòè ìíîãîãðàííîé ãàéêè, ãîëîâêè áîëòà èëè âèíòà, âûïîëíåííûé â ôîðìå öèëèíäðà èëè óñå÷åííîãî êîíóñà äèàìåòðîì, áóëüøèì äèàìåòðà èõ îïèñàííîé îêðóæíîñòè

Áóðò

Íäï. Ôëàíåö

D. Bund

E. Collar

F. Embase

33. Îïîðíûé âûñòóï êðåïåæíîãî èçäåëèÿ

Êîëüöåâîé âûñòóï íà îïîðíîé ïîâåðõíîñòè ìíîãîãðàííîé ãàéêè èëè ãîëîâêè áîëòà, äèàìåòð êîòîðîãî ìåíüøå ðàçìåðà ïîä êëþ÷.

Îïîðíûé âûñòóï

Ïðèìå÷àíèå. Ïîä ðàçìåðîì ïîä êëþ÷ ïîíèìàåòñÿ ðàññòîÿíèå ìåæäó ïðîòèâîïîëîæíûìè ãðàíÿìè ìíîãîãðàííîé ãàéêè èëè ãîëîâêè áîëòà, âèíòà, èçìåðåííîå â ïëîñêîñòè, íîðìàëüíîé ê èõ îñè

Íäï. Îïîðíàÿ øàéáà

«Ìåðòâàÿ øàéáà»

D. Telleransatz

E. Washer face

F. Collerette

34. Øëèö êðåïåæíîãî èçäåëèÿ

Óãëóáëåíèå ñïåöèàëüíîé ôîðìû â òîðöå ãîëîâêè áîëòà, âèíòà èëè øóðóïà, â òîðöå óñòàíîâî÷íîãî âèíòà áåç ãîëîâêè, âäîëü îáðàçóþùåé èëè â òîðöå ãàéêè

Øëèö

Ïðèìå÷àíèå. Ôîðìà øëèöà ìîæåò áûòü øåñòèãðàííîé, êðåñòîîáðàçíîé, â âèäå ñêâîçíîé èëè íåñêâîçíîé ïðîðåçè è ò.ä.

35. Øèï áîëòà

Âûñòóï íà îïîðíîé ïîâåðõíîñòè ãîëîâêè áîëòà, ñëóæàùèé äëÿ ïðåäîòâðàùåíèÿ åãî ïðîâîðà÷èâàíèÿ

Øèï

36. Óñ áîëòà

Âûñòóï íà îïîðíîé ïîâåðõíîñòè ãîëîâêè è ñòåðæíÿ áîëòà, ñëóæàùèé äëÿ ïðåäîòâðàùåíèÿ åãî ïðîâîðà÷èâàíèÿ

Óñ

D. Nase

E. Nib

F. Ergot

37. Áóðàâ÷èê

Ðåçüáîâîé êîíè÷åñêîé êîíåö øóðóïà, ñëóæàùèé äëÿ íàðåçàíèÿ ðåçüáû â äåðåâÿííîì èëè ïëàñòìàññîâîì èçäåëèè ïðè îáðàçîâàíèè ñîåäèíåíèÿ

E. Gimlet point

ÀËÔÀÂÈÒÍÛÉ ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍΠÍÀ ÐÓÑÑÊÎÌ ßÇÛÊÅ

Áîëò                                                                                                                               2

Áîëò äëÿ îòâåðñòèé èç-ïîä ðàçâåðòêè                                                                   13

Áîëò îòêèäíîé                                                                                                           12

Áîëò ïðèçîííûé                                                                                                       13

Áîëò ñòóïåí÷àòûé                                                                                                    11

Áîëò ôóíäàìåíòíûé                                                                                                14

Áóðàâ÷èê                                                                                                                    37

Áóðò                                                                                                                              32

Áóðò êðåïåæíîãî èçäåëèÿ                                                                                       32

Âèíò                                                                                                                               3

Âèíò íåâûïàäàþùèé                                                                                              15

Âèíò ñàìîíàðåçàþùèé                                                                                            16

Âèíò ñàìîíàðåçàþùèé ñàìîñâåðëÿùèé                                                              17

Âèíò óñòàíîâî÷íûé                                                                                                 18

Âûñòóï êðåïåæíîãî èçäåëèÿ îïîðíûé                                                                33

Âûñòóï îïîðíûé                                                                                                         33

Ãàéêà                                                                                                                            7

Ãàéêà-áàðàøåê                                                                                                         23

Ãàéêà êîëïà÷êîâàÿ                                                                                                 22

Ãàéêà êîðîí÷àòàÿ                                                                                                    21

Ãàéêà ïðîðåçíàÿ                                                                                                       20

Ãîëîâêà                                                                                                                        30

Ãîëîâêà êðåïåæíîãî èçäåëèÿ                                                                                30

Çàêëåïêà                                                                                                                    10

Çàêëåïêà ïîëóïóñòîòåëàÿ                                                                                      28

Çàêëåïêà ïóñòîòåëàÿ                                                                                               27

Èçäåëèå êðåïåæíîå                                                                                                   1

Ïîäãîëîâîê                                                                                                                  31

Ïîäãîëîâîê áîëòà                                                                                                     31

Ñòåðæåíü                                                                                                                     29

Ñòåðæåíü êðåïåæíîãî èçäåëèÿ                                                                             29

Óñ                                                                                                                                 36

Óñ áîëòà                                                                                                                      36

Ôëàíåö                                                                                                                         32

Øàéáà                                                                                                                           8

Øàéáà Ãðîâåðà                                                                                                           25

Øàéáà «ìåðòâàÿ»                                                                                                      33

Øàéáà îïîðíàÿ                                                                                                           33

Øàéáà ïëîñêàÿ                                                                                                         24

Øàéáà ïðóæèííàÿ                                                                                                   25

Øàéáà ñòîïîðíàÿ                                                                                                      26

Øèï                                                                                                                             35

Øèï áîëòà                                                                                                                  35

Øëèö                                                                                                                           34

Øëèö êðåïåæíîãî èçäåëèÿ                                                                                    34

Øïèëüêà                                                                                                                      5

Øïëèíò                                                                                                                        9

Øòèôò                                                                                                                           6

Øòèôò ïðóæèííûé                                                                                                  19

Øóðóï                                                                                                                           4

ÀËÔÀÂÈÒÍÛÉ ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍΠÍÀ ÍÅÌÅÖÊÎÌ ßÇÛÊÅ

Ansatz                                                                                                                           31

Augenschraube                                                                                                              12

Blechschraube                                                                                                               16

Bund                                                                                                                              32

Federring                                                                                                                      25

Flügelmulter                                                                                                                  23

Holzschraube                                                                                                                  4

Hutmutter                                                                                                                      22

Kopf                                                                                                                              30

Kronenmutte                                                                                                            20, 21

Mutter                                                                                                                             7

Nase                                                                                                                              36

Niet                                                                                                                               10

Paßschraube                                                                                                                  13

Scheibe                                                                                                                     8, 24

Scheibe mit Lappen oder Nasen                                                                                    26

Schraube                                                                                                                     2, 3

Schraube mit Ansatzschaft                                                                                            11

Schraube mit Dehnschaft                                                                                               15

Splint                                                                                                                              9

Steinschraube                                                                                                                14

Stift                                                                                                                                 6

Stiftschraube                                                                                                                   5

Telleransatz                                                                                                                  33

ÀËÔÀÂÈÒÍÛÉ ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍΠÍÀ ÀÍÃËÈÉÑÊÎÌ ßÇÛÊÅ

Acorn nut                                                                                                                      22

Bolt                                                                                                                                 2

Collar                                                                                                                            32

Eye bolt                                                                                                                         12

Fastener                                                                                                                          1

Fit bolt                                                                                                                          13

Foundation bolt                                                                                                             14

Gimlet point                                                                                                                  37

Head                                                                                                                             30

Hexagon castle nut                                                                                                        21

Hexagon slotted nut                                                                                                       20

Neck                                                                                                                              31

Nib                                                                                                                                36

Nut                                                                                                                                  7

Pin                                                                                                                                   6

Plain washer                                                                                                                 24

Rivet                                                                                                                             10

Screw                                                                                                                              3

Screw with waisted shank                                                                                            15

Self-tapping screw                                                                                                        16

Set screw                                                                                                                      18

Shoulder bolt                                                                                                                11

Split pin                                                                                                                          9

Spring washer                                                                                                               25

Stud                                                                                                                                 5

Tab washer                                                                                                                   26

Washer                                                                                                                            8

Washer face                                                                                                                  33

Wing nut                                                                                                                        23

Wood screw                                                                                                                    4

ÀËÔÀÂÈÒÍÛÉ ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍΠÍÀ ÔÐÀÍÖÓÇÑÊÎÌ ßÇÛÊÅ

Boulon                                                                                                                            2

Collerette                                                                                                                      33

Collet                                                                                                                            31

Corps de boulon ajustable                                                                                            13

Corps de boulon à oeil                                                                                                  12

Corps de boulon renforcée                                                                                            11

Ecrou                                                                                                                              7

Ecrou à oreilles                                                                                                            23

Ecrou borgne á calotte                                                                                                  22

Ecrou hexagonal à créneaux                                                                                          20

Ecrou hexagonal à créneaux dégagés                                                                            21

Embase                                                                                                                         32

Ergot                                                                                                                             36

Frein d’écrou                                                                                                                26

Goujon                                                                                                                            5

Goupille                                                                                                                      6, 9

Rivet                                                                                                                             10

Rondelle                                                                                                                         8

Rondelle élastique                                                                                                        25

Rondelle plate                                                                                                               24

Tête                                                                                                                               30

Tige de scellement                                                                                                        14

Vis                                                                                                                                  3

Vis à bois                                                                                                                        4

Vis à tige allégée                                                                                                          15

Vis à tôle                                                                                                                       16

ÏÐÈËÎÆÅÍÈÅ

Ñïðàâî÷íîå

ÒÅÐÌÈÍÎËÎÃÈß È ÍÎÌÅÍÊËÀÒÓÐÀ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ ÍÀ ÐÓÑÑÊÎÌ, ÍÅÌÅÖÊÎÌ, ÀÍÃËÈÉÑÊÎÌ È ÔÐÀÍÖÓÇÑÊÎÌ ßÇÛÊÀÕ

I. ÒÅÐÌÈÍÎËÎÃÈß È ÍÎÌÅÍÊËÀÒÓÐÀ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ

1. ÐÅÇÜÁÀ

Íàèìåíîâàíèå

×åðòåæ

1.1. Ðåçüáà

1.2. Êîíè÷åñêàÿ ðåçüáà

1.3. Ñàìîíàðåçàþùàÿ ðåçüáà

1.4. Øóðóïíàÿ ðåçüáà

1.5. Ìåòðè÷åñêàÿ ðåçüáà

1.6. Ìåòðè÷åñêàÿ ðåçüáà ñ ìåëêèì øàãîì

2. ÔÎÐÌÛ ÃÎËÎÂÎÊ

Íàèìåíîâàíèå

×åðòåæ

2.1. Øåñòèãðàííàÿ ãîëîâêà

2.2. Øåñòèãðàííàÿ ãîëîâêà ñ îïîðíûì âûñòóïîì

2.3. Øåñòèãðàííàÿ ãîëîâêà ñ öèëèíäðè÷åñêèì áóðòîì

2.4. Øåñòèãðàííàÿ ãîëîâêà ñ ôëàíöåì

2.5. Êâàäðàòíàÿ ãîëîâêà

2.6. Êâàäðàòíàÿ ãîëîâêà ñ öèëèíäðè÷åñêèì áóðòîì

2.7. Òðåõãðàííàÿ ãîëîâêà ñ öèëèíäðè÷åñêèì áóðòîì

2.8. Âîñüìèãðàííàÿ ãîëîâêà

2.9. Äâåíàäöàòèãðàííàÿ ãîëîâêà ñ ôëàíöåì

2.10. Ò-îáðàçíàÿ ãîëîâêà

2.11. Ò-îáðàçíàÿ ãîëîâêà ñ êâàäðàòíûì ïîäãîëîâêîì

2.12. Ïîëóêðóãëàÿ ãîëîâêà

2.13. Íèçêàÿ ïîëóêðóãëàÿ ãîëîâêà

2.14. Ïîëóêðóãëàÿ ãîëîâêà ñ óñîì

2.15. Íèçêàÿ ïîëóêðóãëàÿ ãîëîâêà ñ êâàäðàòíûì ïîäãîëîâêîì

2.16. Ïîëóêðóãëàÿ ãîëîâêà ñ îâàëüíûì ïîäãîëîâêîì

2.17. Öèëèíäðè÷åñêàÿ ãîëîâêà

2.18. Öèëèíäðè÷åñêàÿ ãîëîâêà ñî ñôåðîé

2.19. Íèçêàÿ öèëèíäðè÷åñêàÿ ãîëîâêà ñî ñôåðîé

2.20. Öèëèíäðè÷åñêàÿ ñêðóãëåííàÿ ãîëîâêà

2.21. Ïîòàéíàÿ ãîëîâêà

2.22. Ïîòàéíàÿ ãîëîâêà ñ çàïëå÷èêîì

2.23. Ïîòàéíàÿ ãîëîâêà ñ óñîì

2.24. Ïîòàéíàÿ ãîëîâêà ñ êâàäðàòíûì ïîäãîëîâêîì

2.25. Ïîëóïîòàéíàÿ ãîëîâêà

2.26. Ïîëóïîòàéíàÿ ãîëîâêà ñ çàïëå÷èêîì

2.27. Ðèôëåíàÿ öèëèíäðè÷åñêàÿ ãîëîâêà ñ ïðÿìûì ðèôëåíèåì

2.28. Ðèôëåíàÿ öèëèíäðè÷åñêàÿ ãîëîâêà ñ ñåò÷àòûì ðèôëåíèåì

3. ÔÎÐÌÛ ÑÒÅÐÆÍÅÉ

Íàèìåíîâàíèå

×åðòåæ

3.1. Íîðìàëüíûé ñòåðæåíü (ñòåðæåíü, äèàìåòð êîòîðîãî ðàâåí íîìèíàëüíîìó äèàìåòðó ðåçüáû)

3.2. Óìåíüøåííûé ñòåðæåíü (ñòåðæåíü, äèàìåòð êîòîðîãî ïðèáëèçèòåëüíî ðàâåí ñðåäíåìó äèàìåòðó ðåçüáû)

3.3. Óâåëè÷åííûé ñòåðæåíü, äèàìåòð êîòîðîãî áîëüøå íîìèíàëüíîãî äèàìåòðà ðåçüáû

3.4. Óòîíåííûé ñòåðæåíü (ñòåðæåíü, äèàìåòð êîòîðîãî ìåíüøå âíóòðåííåãî äèàìåòðà ðåçüáû)

3.5. Ñòóïåí÷àòûé ñòåðæåíü

3.6. Ïóñòîòåëûé ñòåðæåíü

3.7. Ïîëóïóñòîòåëûé ñòåðæåíü

4. ÊÎÍÖÛ ÁÎËÒÎÂ È ÂÈÍÒÎÂ

Íàèìåíîâàíèå

×åðòåæ

4.1. Êîíåö áåç ôàñêè

4.2. Ñôåðè÷åñêèé êîíåö

4.3. Êîíåö ñ ôàñêîé

4.4. Êîíè÷åñêèé êîíåö

4.5. Êîíè÷åñêèé ïðèòóïëåííûé êîíåö

4.6. Çàñâåðëåííûé êîíåö

4.7. Ïëîñêèé êîíåö

4.8. Öèëèíäðè÷åñêèé êîíåö

4.9. Öèëèíäðè÷åñêèé óêîðî÷åííûé êîíåö

4.10. Ñòóïåí÷àòûé êîíåö ñî ñôåðîé

4.11. Ñòóïåí÷àòûé êîíåö ñ êîíóñîì

4.12. Êîíè÷åñêèé ñ ïðèòóïëåíèåì êîíåö ñàìîíàðåçàþùåãî âèíòà ñ ðåæóùåé êðîìêîé

4.13. Êîíè÷åñêèé êîíåö ñàìîíàðåçàþùåãî âèíòà

4.14. Ïëîñêèé êîíåö ñàìîíàðåçàþùåãî âèíòà

4.15. Êîíåö ðåçüáîâûäàâëèâàþùåãî âèíòà

4.16. Áóðàâ÷èê øóðóïà

5. ÝËÅÌÅÍÒÛ, ÏÅÐÅÄÀÞÙÈÅ ÂÐÀÙÅÍÈÅ

Íàèìåíîâàíèå

×åðòåæ

5.1. Øåñòèãðàííèê

5.2. Êâàäðàò

5.3. Òðåõãðàííèê

5.4. Âîñüìèãðàííèê

5.5. Äâåíàäöàòèãðàííèê

5.6. Òðåõãðàííîå óãëóáëåíèå

5.7. Êâàäðàòíîå óãëóáëåíèå

5.8. Øåñòèãðàííîå óãëóáëåíèå

5.9. Øëèöåâîå óãëóáëåíèå

5.10. Çóá÷àòîå óãëóáëåíèå

5.11. Ïðÿìîé øëèö

5.12. Êðåñòîîáðàçíûé øëèö

5.13. Áàðàøåê

5.14. Ïðÿìîå ðèôëåíèå

5.15. Ñåò÷àòîå ðèôëåíèå

5.16. Íàêðåñò ðàñïîëîæåííûå îòâåðñòèÿ

6. ÁÎËÒÛ È ÂÈÍÒÛ Ñ ØÅÑÒÈÃÐÀÍÍÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

6.1. Áîëò ñ øåñòèãðàííîé ãîëîâêîé

6.2. Ñòóïåí÷àòûé áîëò ñ øåñòèãðàííîé ãîëîâêîé

6.3. Óñòàíîâî÷íûé âèíò ñ øåñòèãðàííîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì

6.4. Óñòàíîâî÷íûé âèíò ñ øåñòèãðàííîé ãîëîâêîé è ñòóïåí÷àòûì êîíöîì ñ êîíóñîì

6.5. Âèíò ñ øåñòèãðàííîé ãîëîâêîé è óòîíåííûì ñòåðæíåì

6.6. Áîëò ñ øåñòèãðàííîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì

6.7. Áîëò ñ øåñòèãðàííîé ãîëîâêîé ñ ôëàíöåì

7. ÂÈÍÒÛ Ñ ×ÅÒÛÐÅÕÃÐÀÍÍÎÉ (ÊÂÀÄÐÀÒÍÎÉ) ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

7.1. Âèíò ñ êâàäðàòíîé ãîëîâêîé

7.2. Âèíò ñ êâàäðàòíîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì

7.3. Óñòàíîâî÷íûé âèíò ñ êâàäðàòíîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì

7.4. Óñòàíîâî÷íûé âèíò ñ êâàäðàòíîé ãîëîâêîé è çàñâåðëåííûì êîíöîì

7.5. Óñòàíîâî÷íûé âèíò ñ êâàäðàòíîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì è ñòóïåí÷àòûì êîíöîì ñî ñôåðîé

8. ÁÎËÒÛ Ñ ÒÐÅÕÃÐÀÍÍÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

8. Áîëò ñ òðåõãðàííîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì

9. ÁÎËÒÛ Ñ ÂÎÑÜÌÈÃÐÀÍÍÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

9. Áîëò ñ âîñüìèãðàííîé ãîëîâêîé

10. ÁÎËÒÛ Ñ ÄÂÅÍÀÄÖÀÒÈÃÐÀÍÍÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

10. Áîëò ñ äâåíàäöàòèãðàííîé ãîëîâêîé ñ ôëàíöåì

11. ÁÎËÒÛ Ñ Ò-ÎÁÐÀÇÍÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

11.1. Áîëò ñ Ò-îáðàçíîé ãîëîâêîé

11.2. Áîëò ñ Ò-îáðàçíîé ãîëîâêîé è êâàäðàòíûì ïîäãîëîâêîì

11.3. Áîëò ñ Ò-îáðàçíîé ãîëîâêîé è âûñòóïàìè ïîä ãîëîâêîé

12. ÁÎËÒÛ Ñ ÏÎËÓÊÐÓÃËÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

12.1. Áîëòû ñ íèçêîé ïîëóêðóãëîé ãîëîâêîé è êâàäðàòíûì ïîäãîëîâêîì

12.2. Áîëò ñ ïîëóêðóãëîé ãîëîâêîé è óñîì

12.3. Áîëò ñ íèçêîé ïîëóêðóãëîé ãîëîâêîé è óñîì

12.4. Áîëò ñ ïîëóêðóãëîé ãîëîâêîé è îâàëüíûì ïîäãîëîâêîì

13. ÁÎËÒÛ Ñ ÏÎÒÀÉÍÛÌÈ ÃÎËÎÂÊÀÌÈ

Íàèìåíîâàíèå

×åðòåæ

13.1. Áîëò ñ ïîòàéíîé ãîëîâêîé è êâàäðàòíûì ïîäãîëîâêîì

13.2. Áîëò ñ ïîòàéíîé ãîëîâêîé è óñîì

13.3. Øèííûé áîëò

14. ÂÈÍÒÛ Ñ ÂÍÓÒÐÅÍÍÈÌ ØÅÑÒÈÃÐÀÍÍÈÊÎÌ

Íàèìåíîâàíèå

×åðòåæ

14.1. Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

14.2. Ñòóïåí÷àòûé âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

14.3. Âèíò ñ ïîòàéíîé ãîëîâêîé è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

15. ÂÈÍÒÛ Ñ ÏÐßÌÛÌ ØËÈÖÅÌ

Íàèìåíîâàíèå

×åðòåæ

15.1. Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé

15.2. Âèíò ñ öèëèíäðè÷åñêîé ñêðóãëåííîé ãîëîâêîé

15.3. Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé

15.4. Óñòàíîâî÷íûé âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è öèëèíäðè÷åñêèì êîíöîì

15.5. Ñòóïåí÷àòûé âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé

15.6. Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé, ñ îòâåðñòèåì â ãîëîâêå

15.7. Âèíò ñ óìåíüøåííîé öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé

15.8. Âèíò ñ ïîòàéíîé ãîëîâêîé

15.9. Óñòàíîâî÷íûé âèíò ñ ïîòàéíîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì

15.10. Âèíò ñ ïîëóïîòàéíîé ãîëîâêîé

15.11. Óñòàíîâî÷íûé âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì

15.12. Âèíò ñ ïîòàéíîé ãîëîâêîé è ïðÿìûì çàêðûòûì øëèöåì

15.13. Âèíò ñ ïîëóêðóãëîé ãîëîâêîé

16. ÂÈÍÒÛ Ñ ÊÐÅÑÒÎÎÁÐÀÇÍÛÌ ØËÈÖÅÌ

Íàèìåíîâàíèå

×åðòåæ

16.1. Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è êðåñòîîáðàçíûì øëèöåì

16.2. Âèíò ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

16.3. Âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

16.4. Âèíò ñ ïîëóêðóãëîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

17. ÂÈÍÒÛ Ñ ÍÅÂÛÏÀÄÀÞÙÈÌÈ ÄÅÒÀËßÌÈ

Íàèìåíîâàíèå

×åðòåæ

17.1. Âèíò ñ øåñòèãðàííîé ãîëîâêîé ñ íåâûïàäàþùåé ïëîñêîé øàéáîé

17.2. Âèíò ñ øåñòèãðàííîé ãîëîâêîé ñ íåâûïàäàþùèìè ïðóæèííîé è ïëîñêîé øàéáàìè

17.3. Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è íåâûïàäàþùåé ïðóæèííîé øàéáîé

17.4. Âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è íåâûïàäàþùåé ñòîïîðíîé øàéáîé

18. ÐÀÇËÈ×ÍÛÅ ÒÈÏÛ ÁÎËÒÎÂ È ÂÈÍÒÎÂ

Íàèìåíîâàíèå

×åðòåæ

18.1. Îòêèäíîé áîëò

18.2. Áîëò ñ íèçêîé ïîëóêðóãëîé ãîëîâêîé è øèïîì

18.3. Áîëò ñ ïëîñêîé ãîëîâêîé è øèïîì

18.4. Áîëò ñ ïîòàéíîé ãîëîâêîé è äâóìÿ øèïàìè

18.5. Êîñòûëüêîâûé áîëò

18.6. Áîëò ñ êîëïà÷êîâîé ãîëîâêîé

18.7. Êîíè÷åñêèé áîëò

18.8. Àíêåðíûé áîëò

18.9. Ôóíäàìåíòíûé áîëò

18.10. Âèíò-áàðàøåê

18.11. Ðûì-áîëò

19. ÓÑÒÀÍÎÂÎ×ÍÛÅ ÂÈÍÒÛ ÁÅÇ ÃÎËÎÂÎÊ

Íàèìåíîâàíèå

×åðòåæ

19.1. Óñòàíîâî÷íûé âèíò ñ ïëîñêèì êîíöîì

19.2. Óñòàíîâî÷íûé âèíò ñ öèëèíäðè÷åñêèì êîíöîì

19.3. Óñòàíîâî÷íûé âèíò ñ çàñâåðëåííûì êîíöîì

19.4. Óñòàíîâî÷íûé âèíò ñ êîíè÷åñêèì êîíöîì

19.5. Óñòàíîâî÷íûé âèíò ñ ïëîñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

19.6. Óñòàíîâî÷íûé âèíò ñ öèëèíäðè÷åñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

19.7. Óñòàíîâî÷íûé âèíò ñ çàñâåðëåííûì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

19.8. Óñòàíîâî÷íûé âèíò ñ êîíè÷åñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

20. ÑÀÌÎÍÀÐÅÇÀÞÙÈÅ ÂÈÍÒÛ

Íàèìåíîâàíèå

×åðòåæ

20.1. Ñàìîíàðåçàþùèé âèíò ñ øåñòèãðàííîé ãîëîâêîé

20.2. Ñàìîíàðåçàþùèé âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé

20.3. Ñàìîíàðåçàþùèé âèíò ñ ïîòàéíîé ãîëîâêîé

20.4. Ñàìîíàðåçàþùèé âèíò ñ ïîëóïîòàéíîé ãîëîâêîé

20.5. Ñàìîíàðåçàþùèé âèíò ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

20.6. Ñàìîíàðåçàþùèé âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

20.7. Ñàìîíàðåçàþùèé âèíò ñ öèëèíäðè÷åñêîé ñêðóãëåííîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

21. ØÓÐÓÏÛ

Íàèìåíîâàíèå

×åðòåæ

21.1. Øóðóï ñ øåñòèãðàííîé ãîëîâêîé

21.2. Øóðóï ñ êâàäðàòíîé ãîëîâêîé

21.3. Øóðóï ñ ïîëóêðóãëîé ãîëîâêîé

21.4. Øóðóï ñ ïîëóïîòàéíîé ãîëîâêîé

21.5. Øóðóï ñ ïîòàéíîé ãîëîâêîé

21.6. Øóðóï ñ ïîëóêðóãëîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

21.7. Øóðóï ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

21.8. Øóðóï ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

22. ÐÅÇÜÁÎÍÀÐÅÇÀÞÙÈÅ ÂÈÍÒÛ

Íàèìåíîâàíèå

×åðòåæ

22.1. Ðåçüáîíàðåçàþùèé âèíò ñ øåñòèãðàííîé ãîëîâêîé

22.2. Ðåçüáîíàðåçàþùèé âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé

22.3. Ðåçüáîíàðåçàþùèé âèíò ñ ïîòàéíîé ãîëîâêîé

22.4. Ðåçüáîíàðåçàþùèé âèíò ñ ïîëóïîòàéíîé ãîëîâêîé

22.5. Ðåçüáîíàðåçàþùèé âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è êðåñòîîáðàçíûì øëèöåì

22.6. Ðåçüáîíàðåçàþùèé âèíò ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

22.7. Ðåçüáîíàðåçàþùèé âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì

23. ÐÅÇÜÁÎÂÛÄÀÂËÈÂÀÞÙÈÅ ÂÈÍÒÛ

Íàèìåíîâàíèå

×åðòåæ

23. Ðåçüáîâûäàâëèâàþùèé âèíò

24. ÂÈÍÒÛ Ñ ÐÈÔËÅÍÎÉ ÃÎËÎÂÊÎÉ

Íàèìåíîâàíèå

×åðòåæ

24.1. Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è ïëîñêèì êîíöîì

24.2. Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è êîíè÷åñêèì êîíöîì

24.3. Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è ñòóïåí÷àòûì êîíöîì ñ êîíóñîì

24.4. Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è çàñâåðëåííûì êîíöîì

24.5. Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è ñôåðè÷åñêèì êîíöîì

24.6. Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì

25. ØÒÈÔÒÛ

Íàèìåíîâàíèå

×åðòåæ

25.1. Öèëèíäðè÷åñêèé øòèôò

25.2. Öèëèíäðè÷åñêèé øòèôò ñ âíóòðåííåé ðåçüáîé

25.3. Öèëèíäðè÷åñêèé øòèôò ñ çàñâåðëåííûìè êîíöàìè

25.4. Öèëèíäðè÷åñêèé íàñå÷åííûé øòèôò

25.5. Öèëèíäðè÷åñêèé íàñå÷åííûé øòèôò ñ êîíè÷åñêèìè íàñå÷êàìè

25.6. Êîíè÷åñêèé ðàçâîäíîé øòèôò

25.7. Êîíè÷åñêèé øòèôò

25.8. Êîíè÷åñêèé øòèôò ñ âíóòðåííåé ðåçüáîé

25.9. Êîíè÷åñêèé øòèôò ñ ðåçüáîâîé öàïôîé

25.10. Ïðóæèííûé øòèôò

25.11. Ðåçüáîâîé øòèôò ñ ïëîñêèì êîíöîì è øëèöåì

25.12. Ðåçüáîâîé øòèôò ñ ïëîñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

25.13. Ðåçüáîâîé øòèôò ñ êîíè÷åñêèì ïðèòóïëåííûì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

25.14. Ðåçüáîâîé øòèôò ñ öèëèíäðè÷åñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷.

25.15. Ðåçüáîâîé øòèôò ñ çàñâåðëåííûì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷

26. ØÏÈËÜÊÈ

Íàèìåíîâàíèå

×åðòåæ

26.1. Øïèëüêà

26.2. Øïèëüêà ñ óòîíåííûì ñòåðæíåì

26.3. Øïèëüêà ñ ðåçüáîé ïî âñåé äëèíå

26.4. Ïðèâàðíàÿ øïèëüêà

26.5. Ñòÿæíàÿ øïèëüêà ñ ïðîòî÷êàìè è øåñòèãðàííûì õâîñòîâèêîì

27. ÇÀÊËÅÏÊÈ

Íàèìåíîâàíèå

×åðòåæ

27.1. Çàêëåïêà ñ ïîëóêðóãëîé ãîëîâêîé

27.2. Çàêëåïêà ñ ïîëóêðóãëîé íèçêîé ãîëîâêîé

27.3. Çàêëåïêà ñ ïîòàéíîé ãîëîâêîé

27.4. Çàêëåïêà ñ ïîëóïîòàéíîé ãîëîâêîé

27.5. Çàêëåïêà ñ ïîëóïîòàéíîé íèçêîé ãîëîâêîé

27.6. Çàêëåïêà ñ ïëîñêîé ãîëîâêîé

27.7. Ïóñòîòåëàÿ çàêëåïêà ñî ñêðóãëåííîé ãîëîâêîé

27.8. Ïóñòîòåëàÿ çàêëåïêà ñ ïëîñêîé ãîëîâêîé

27.9. Ïóñòîòåëàÿ çàêëåïêà ñ ïîòàéíîé ãîëîâêîé

27.10. Ïóñòîòåëàÿ çàêëåïêà ñ ïëîñêîé ãîëîâêîé

27.11. Ïóñòîòåëàÿ çàêëåïêà ñ ïîòàéíîé ãîëîâêîé

27.12. Ïîëóïóñòîòåëàÿ çàêëåïêà ñ ïîëóêðóãëîé ãîëîâêîé

28. ÃÀÉÊÈ

Íàèìåíîâàíèå

×åðòåæ

28.1. Øåñòèãðàííàÿ ãàéêà

28.2. Øåñòèãðàííàÿ íèçêàÿ ãàéêà

28.3. Øåñòèãðàííàÿ ãàéêà ñ öèëèíäðè÷åñêèì áóðòîì

28.4. Øåñòèãðàííàÿ ãàéêà ñ ôëàíöåì

28.5. Øåñòèãðàííàÿ ãàéêà ñ îïîðíîé øàéáîé

28.6. Øåñòèãðàííàÿ ïðèâàðíàÿ ãàéêà

28.7. Êâàäðàòíàÿ ãàéêà

28.8. Êâàäðàòíàÿ íèçêàÿ ãàéêà

28.9. Àíêåðíàÿ ãàéêà

28.10. Êâàäðàòíàÿ ãàéêà ñ öèëèíäðè÷åñêèì áóðòîì

28.11. Êâàäðàòíàÿ ïðèâàðíàÿ ãàéêà

28.12. Òðåõãðàííàÿ ãàéêà ñ öèëèíäðè÷åñêèì áóðòîì

28.13. Âîñüìèãðàííàÿ ãàéêà

28.14. Äâåíàäöàòèãðàííàÿ ãàéêà ñ ôëàíöåì

28.15. Ñàìîêîíòðÿùàÿñÿ ãàéêà ñ äåôîðìèðîâàííîé ðåçüáîé

28.16. Ñàìîêîíòðÿùàÿñÿ ãàéêà ñ êîëüöåâîé âñòàâêîé èç ïîëèìåðà

28.17. Øåñòèãðàííàÿ ïðîðåçíàÿ ãàéêà

28.18. Øåñòèãðàííàÿ êîðîí÷àòàÿ ãàéêà

28.19. Øåñòèãðàííàÿ íèçêàÿ êîðîí÷àòàÿ ãàéêà

28.20. Êîëïà÷êîâàÿ ãàéêà

28.21. Ðèôëåíàÿ ãàéêà

28.22. Êðóãëàÿ ãàéêà ñî øëèöåì íà òîðöå

28.23. Øëèöåâàÿ ãàéêà

28.24. Êðóãëàÿ ãàéêà ñ ðàäèàëüíî ðàñïîëîæåííûìè îòâåðñòèÿìè

28.25. Êðóãëàÿ ãàéêà ñ îòâåðñòèÿìè íà òîðöå ïîä êëþ÷

28.26. Ãàéêà-áàðàøåê

29. ØÀÉÁÛ

Íàèìåíîâàíèå

×åðòåæ

29.1. Êðóãëàÿ ïëîñêàÿ øàéáà

29.2. Êâàäðàòíàÿ øàéáà

29.3. Êðóãëàÿ øàéáà ñ êâàäðàòíûì îòâåðñòèåì

29.4. Êîñàÿ øàéáà

29.5. Ïðóæèííàÿ øàéáà

29.6. Ïðóæèííàÿ øàéáà ñ îòîãíóòûìè êîíöàìè

29.7. Ïðóæèííàÿ äâóõâèòêîâàÿ øàéáà

29.8. Ïðóæèííàÿ èçîãíóòàÿ øàéáà

29.9. Ñòîïîðíàÿ øàéáà ñ íàðóæíûìè çóáüÿìè

29.10. Ñòîïîðíàÿ øàéáà ñ âíóòðåííèìè çóáüÿìè

29.11. Ñòîïîðíàÿ øàéáà ñ çóáüÿìè ïîä âèíòû ñ ïîòàéíîé è ïîëóïîòàéíîé ãîëîâêîé

29.12. Ïðóæèííàÿ âîëíèñòàÿ øàéáà

29.13. Ïðóæèííàÿ øàéáà ñ íàðóæíûìè çóáüÿìè

29.14. Ïðóæèííàÿ øàéáà ñ âíóòðåííèìè çóáüÿìè

29.15. Ïðóæèííàÿ øàéáà ñ çóáüÿìè ïîä âèíòû ñ ïîòàéíîé è ïîëóïîòàéíîé ãîëîâêîé

29.16. Ñòîïîðíàÿ øàéáà ñ äâóìÿ ëàïêàìè

29.17. Ñòîïîðíàÿ øàéáà ñ íàðóæíûì íîñêîì

29.18. Ñòîïîðíàÿ øàéáà ñ ëàïêîé

29.19. Ñòîïîðíàÿ øàéáà ñ âíóòðåííèì íîñêîì

30. ØÏËÈÍÒÛ

Íàèìåíîâàíèå

×åðòåæ

30. Øïëèíò

II. ÀËÔÀÂÈÒÍÛÉ ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍÎÂ È ÍÀÈÌÅÍÎÂÀÍÈÉ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ ÍÀ ÐÓÑÑÊÎÌ ßÇÛÊÅ

Áàðàøåê                                                                                                                          5.13

Áîëò àíêåðíûé                                                                                                              18.8

Áîëò êîíè÷åñêèé                                                                                                           18.7

Áîëò êîñòûëüêîâûé                                                                                                       18.5

Áîëò îòêèäíîé                                                                                                               18.1

Áîëò ñ âîñüìèãðàííîé ãîëîâêîé                                                                                  9

Áîëò ñ äâåíàäöàòèãðàííîé ãîëîâêîé ñ ôëàíöåì                                                       10

Áîëò ñ êîëïà÷êîâîé ãîëîâêîé                                                                                      18.6

Áîëò ñ íèçêîé ïîëóêðóãëîé ãîëîâêîé è êâàäðàòíûì ïîäãîëîâêîì                         12.1

Áîëò ñ íèçêîé ïîëóêðóãëîé ãîëîâêîé è óñîì                                                             12.3

Áîëò ñ íèçêîé ïîëóêðóãëîé ãîëîâêîé è øèïîì                                                         18.2

Áîëò ñ ïëîñêîé ãîëîâêîé è øèïîì                                                                              18.3

Áîëò ñ ïîëóêðóãëîé ãîëîâêîé è îâàëüíûì ïîäãîëîâêîì                                          12.4

Áîëò ñ ïîëóêðóãëîé ãîëîâêîé è óñîì                                                                          12.2

Áîëò ñ ïîòàéíîé ãîëîâêîé è êâàäðàòíûì ïîäãîëîâêîì                                           13.1

Áîëò ñ ïîòàéíîé ãîëîâêîé è äâóìÿ øèïàìè                                                              18.4

Áîëò ñ ïîòàéíîé ãîëîâêîé è óñîì                                                                               13.2

Áîëò ñ Ò-îáðàçíîé ãîëîâêîé                                                                                        11.1

Áîëò ñ Ò-îáðàçíîé ãîëîâêîé è âûñòóïàìè ïîä ãîëîâêîé                                          11.3

Áîëò ñ Ò-îáðàçíîé ãîëîâêîé è êâàäðàòíûì ïîäãîëîâêîì                                        11.2

Áîëò ñ òðåõãðàííîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì                                        8

Áîëò ñòóïåí÷àòûé ñ øåñòèãðàííîé ãîëîâêîé                                                            6.2

Áîëò ñ øåñòèãðàííîé ãîëîâêîé                                                                                   6.1

Áîëò ñ øåñòèãðàííîé ãîëîâêîé ñ ôëàíöåì                                                                6.7

Áîëò ñ øåñòèãðàííîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì                                     6.6

Áîëò ôóíäàìåíòíûé                                                                                                     18.9

Áîëò øèííûé                                                                                                                 13.3

Áóðàâ÷èê øóðóïà                                                                                                           4.16

Âèíò-áàðàøåê                                                                                                                                             18.10

Âèíò ðåçüáîâûäàâëèâàþùèé                                                                                       23

Âèíò ðåçüáîâûäàâëèâàþùèé ñ ïîëóïîòàéíîé ãîëîâêîé                                          22.4

Âèíò ðåçüáîíàðåçàþùèé ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì  22.7

Âèíò ðåçüáîíàðåçàþùèé ñ ïîòàéíîé ãîëîâêîé                                                         22.3

Âèíò ðåçüáîíàðåçàþùèé ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì          22.6

Âèíò ðåçüáîíàðåçàþùèé ñ öèëèíäðè÷åñêîé ãîëîâêîé                                             22.2

Âèíò ðåçüáîíàðåçàþùèé ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è êðåñòîîáðàçíûì øëèöåì                                                                                                                                  22.5

Âèíò ðåçüáîíàðåçàþùèé ñ øåñòèãðàííîé ãîëîâêîé                                                 22.1

Âèíò ñàìîíàðåçàþùèé ñ ïîëóïîòàéíîé ãîëîâêîé                                                    20.4

Âèíò ñàìîíàðåçàþùèé ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì     20.6

Âèíò ñàìîíàðåçàþùèé ñ ïîòàéíîé ãîëîâêîé                                                            20.3

Âèíò ñàìîíàðåçàþùèé ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì             20.5

Âèíò ñàìîíàðåçàþùèé ñ öèëèíäðè÷åñêîé ãîëîâêîé                                                20.2

Âèíò ñàìîíàðåçàþùèé ñ öèëèíäðè÷åñêîé ñêðóãëåííîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                                                                                                                 20.7

Âèíò ñàìîíàðåçàþùèé ñ øåñòèãðàííîé ãîëîâêîé                                                    20.1

Âèíò ñ êâàäðàòíîé ãîëîâêîé                                                                                       7.1

Âèíò ñ êâàäðàòíîé ãîëîâêîé ñ öèëèíäðè÷åñêèì áóðòîì                                         7.2

Âèíò ñ ïîëóêðóãëîé ãîëîâêîé                                                                                                                                             15.13

Âèíò ñ ïîëóêðóãëîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                      16.4

Âèíò ñ ïîëóïîòàéíîé ãîëîâêîé                                                                                                                                             15.10

Âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                    16.3

Âèíò ñ ïîëóïîòàéíîé ãîëîâêîé è íåâûïàäàþùåé ñòîïîðíîé øàéáîé                   17.4

Âèíò ñ ïîòàéíîé ãîëîâêîé                                                                                           15.8

Âèíò ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                            16.2

Âèíò ñ ïîòàéíîé ãîëîâêîé è ïðÿìûì çàêðûòûì øëèöåì                                                                                                                                             15.12

Âèíò ñ ïîòàéíîé ãîëîâêîé è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                     14.3

Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è çàñâåðëåííûì êîíöîì                  24.4

Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è êîíè÷åñêèì êîíöîì                     24.2

Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è ïëîñêèì êîíöîì                           24.1

Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è ñòóïåí÷àòûì êîíöîì è êîíóñîì 24.3

Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è ñôåðè÷åñêèì êîíöîì                   24.5

Âèíò ñ ðèôëåíîé öèëèíäðè÷åñêîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì             24.6

Âèíò ñòóïåí÷àòûé ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé                                     15.5

Âèíò ñòóïåí÷àòûé ñ öèëèíäðè÷åñêîé ãîëîâêîé è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                               14.2

Âèíò ñ óìåíüøåííîé öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé                                    15.7

Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé                                                                              15.1

Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé                                                            15.3

Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è êðåñòîîáðàçíûì øëèöåì             16.1

Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è íåâûïàäàþùåé ïðóæèííîé øàéáîé                                                                                                                                17.3

Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé, ñ îòâåðñòèåì â ãîëîâêå                   15.6

Âèíò ñ öèëèíäðè÷åñêîé ãîëîâêîé è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷         14.1

Âèíò ñ öèëèíäðè÷åñêîé ñêðóãëåííîé ãîëîâêîé                                                        15.2

Âèíò ñ øåñòèãðàííîé ãîëîâêîé ñ íåâûïàäàþùåé ïëîñêîé øàéáîé                        17.1

Âèíò ñ øåñòèãðàííîé ãîëîâêîé ñ íåâûïàäàþùèìè ïðóæèííîé è ïëîñêîé øàéáàìè                                                                                                                                 17.2

Âèíò ñ øåñòèãðàííîé ãîëîâêîé è óòîíåííûì ñòåðæíåì                                         6.5

Âèíò óñòàíîâî÷íûé ñ çàñâåðëåííûì êîíöîì                                                            19.3

Âèíò óñòàíîâî÷íûé ñ çàñâåðëåííûì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                                 19.7

Âèíò óñòàíîâî÷íûé ñ êâàäðàòíîé ãîëîâêîé è çàñâåðëåííûì êîíöîì                    7.4

Âèíò óñòàíîâî÷íûé ñ êâàäðàòíîé ãîëîâêîé è öèëèíäðè÷åñêèì áóðòîì è ñòóïåí÷àòûì êîíöîì ñî ñôåðîé                                                                                                                                  7.5

Âèíò óñòàíîâî÷íûé ñ êâàäðàòíîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì               7.3

Âèíò óñòàíîâî÷íûé ñ êîíè÷åñêèì êîíöîì                                                                19.4

Âèíò óñòàíîâî÷íûé ñ êîíè÷åñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                               19.8

Âèíò óñòàíîâî÷íûé ñ ïëîñêèì êîíöîì                                                                      19.1

Âèíò óñòàíîâî÷íûé ñ ïëîñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                              19.5

Âèíò óñòàíîâî÷íûé ñ ïîëóïîòàéíîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì                                                                                                                                             15.11

Âèíò óñòàíîâî÷íûé ñ ïîòàéíîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì                  15.9

Âèíò óñòàíîâî÷íûé ñ öèëèíäðè÷åñêèì êîíöîì                                                       19.2

Âèíò óñòàíîâî÷íûé ñ öèëèíäðè÷åñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                                  19.6

Âèíò óñòàíîâî÷íûé ñ öèëèíäðè÷åñêîé ãîëîâêîé ñî ñôåðîé è öèëèíäðè÷åñêèì êîíöîì                                                                                                                                     15.4

Âèíò óñòàíîâî÷íûé ñ øåñòèãðàííîé ãîëîâêîé è ñòóïåí÷àòûì êîíöîì ñ êîíóñîì                                                                                                                                 6.4

Âèíò óñòàíîâî÷íûé ñ øåñòèãðàííîé ãîëîâêîé è öèëèíäðè÷åñêèì êîíöîì          6.3

Âîñüìèãðàííèê                                                                                                             5.4

Ãàéêà àíêåðíàÿ                                                                                                             28.9

Ãàéêà-áàðàøåê                                                                                                                                             28.26

Ãàéêà âîñüìèãðàííàÿ                                                                                                                                             28.13

Ãàéêà äâåíàäöàòèãðàííàÿ ñ ôëàíöåì                                                                                                                                             28.14

Ãàéêà êâàäðàòíàÿ                                                                                                          28.7

Ãàéêà êâàäðàòíàÿ íèçêàÿ                                                                                             28.8

Ãàéêà êâàäðàòíàÿ ïðèâàðíàÿ                                                                                                                                             28.11

Ãàéêà êâàäðàòíàÿ ñ öèëèíäðè÷åñêèì áóðòîì                                                                                                                                             28.10

Ãàéêà êîëïà÷êîâàÿ                                                                                                                                             28.20

Ãàéêà êðóãëàÿ ñ îòâåðñòèÿìè íà òîðöå ïîä êëþ÷                                                                                                                                             28.25

Ãàéêà êðóãëàÿ ñ ðàäèàëüíî ðàñïîëîæåííûìè îòâåðñòèÿìè                                                                                                                                             28.24

Ãàéêà êðóãëàÿ ñî øëèöåì íà òîðöå                                                                                                                                             28.22

Ãàéêà ðèôëåíàÿ                                                                                                                                             28.21

Ãàéêà ñàìîêîíòðÿùàÿñÿ ñ äåôîðìèðîâàííîé ðåçüáîé                                                                                                                                             28.15

Ãàéêà ñàìîêîíòðÿùàÿñÿ ñ êîëüöåâîé âñòàâêîé èç ïîëèìåðà                                                                                                                                             28.16

Ãàéêà òðåõãðàííàÿ ñ öèëèíäðè÷åñêèì áóðòîì                                                                                                                                             28.12

Ãàéêà øåñòèãðàííàÿ                                                                                                     28.1

Ãàéêà øåñòèãðàííàÿ êîðîí÷àòàÿ                                                                                                                                             28.18

Ãàéêà øåñòèãðàííàÿ íèçêàÿ                                                                                         28.2

Ãàéêà øåñòèãðàííàÿ íèçêàÿ êîðîí÷àòàÿ                                                                                                                                             28.19

Ãàéêà øåñòèãðàííàÿ ïðèâàðíàÿ                                                                                  28.6

Ãàéêà øåñòèãðàííàÿ ïðîðåçíàÿ                                                                                                                                             28.17

Ãàéêà øåñòèãðàííàÿ ñ îïîðíîé øàéáîé                                                                     28.5

Ãàéêà øåñòèãðàííàÿ ñ ôëàíöåì                                                                                  28.4

Ãàéêà øåñòèãðàííàÿ ñ öèëèíäðè÷åñêèì áóðòîì                                                       28.3

Ãàéêà øëèöåâàÿ                                                                                                                                             28.23

Ãîëîâêà âîñüìèãðàííàÿ                                                                                                2.8

Ãîëîâêà äâåíàäöàòèãðàííàÿ ñ ôëàíöåì                                                                     2.9

Ãîëîâêà êâàäðàòíàÿ                                                                                                      2.5

Ãîëîâêà êâàäðàòíàÿ ñ öèëèíäðè÷åñêèì áóðòîì                                                        2.6

Ãîëîâêà íèçêàÿ ïîëóêðóãëàÿ                                                                                        2.13

Ãîëîâêà íèçêàÿ ïîëóêðóãëàÿ ñ êâàäðàòíûì ïîäãîëîâêîì                                        2.15

Ãîëîâêà íèçêàÿ öèëèíäðè÷åñêàÿ ñî ñôåðîé                                                              2.19

Ãîëîâêà ïîëóêðóãëàÿ                                                                                                    2.12

Ãîëîâêà ïîëóêðóãëàÿ ñ îâàëüíûì ïîäãîëîâêîì                                                        2.16

Ãîëîâêà ïîëóêðóãëàÿ ñ óñîì                                                                                        2.14

Ãîëîâêà ïîëóïîòàéíàÿ                                                                                                 2.25

Ãîëîâêà ïîëóïîòàéíàÿ ñ çàïëå÷èêîì                                                                         2.26

Ãîëîâêà ïîòàéíàÿ                                                                                                         2.21

Ãîëîâêà ïîòàéíàÿ ñ çàïëå÷èêîì                                                                                 2.22

Ãîëîâêà ïîòàéíàÿ ñ êâàäðàòíûì ïîäãîëîâêîì                                                          2.24

Ãîëîâêà ïîòàéíàÿ ñ óñîì                                                                                             2.23

Ãîëîâêà ðèôëåíàÿ öèëèíäðè÷åñêàÿ ñ ïðÿìûì ðèôëåíèåì                                      2.27

Ãîëîâêà ðèôëåíàÿ öèëèíäðè÷åñêàÿ ñ ñåò÷àòûì ðèôëåíèåì                                   2.28

Ãîëîâêà öèëèíäðè÷åñêàÿ ñî ñôåðîé                                                                           2.18

Ãîëîâêà Ò-îáðàçíàÿ                                                                                                      2.10

Ãîëîâêà Ò-îáðàçíàÿ ñ êâàäðàòíûì ïîäãîëîâêîì                                                       2.11

Ãîëîâêà òðåõãðàííàÿ ñ öèëèíäðè÷åñêèì áóðòîì                                                      2.7

Ãîëîâêà öèëèíäðè÷åñêàÿ                                                                                             2.17

Ãîëîâêà öèëèíäðè÷åñêàÿ ñêðóãëåííàÿ                                                                       2.20

Ãîëîâêà øåñòèãðàííàÿ                                                                                                 2.1

Ãîëîâêà øåñòèãðàííàÿ ñ ôëàíöåì                                                                              2.4

Ãîëîâêà øåñòèãðàííàÿ ñ îïîðíîé øàéáîé                                                                 2.2

Ãîëîâêà øåñòèãðàííàÿ ñ öèëèíäðè÷åñêèì áóðòîì                                                   2.3

Äâåíàäöàòèãðàííèê                                                                                                      5.5

Çàêëåïêà ïîëóïóñòîòåëàÿ ñ ïëîñêîé ãîëîâêîé                                                                                                                                             27.10

Çàêëåïêà ïîëóïóñòîòåëàÿ ñ ïîëóêðóãëîé ãîëîâêîé                                                                                                                                             27.12

Çàêëåïêà ïîëóïóñòîòåëàÿ ñ ïîòàéíîé ãîëîâêîé                                                                                                                                             27.11

Çàêëåïêà ñ ïëîñêîé ãîëîâêîé                                                                                      27.6

Çàêëåïêà ñ ïîëóêðóãëîé ãîëîâêîé                                                                               27.1

Çàêëåïêà ñ ïîëóêðóãëîé íèçêîé ãîëîâêîé                                                                 27.2

Çàêëåïêà ñ ïîëóïîòàéíîé ãîëîâêîé                                                                            27.4

Çàêëåïêà ñ ïîëóïîòàéíîé íèçêîé ãîëîâêîé                                                               27.5

Çàêëåïêà ñ ïîòàéíîé ãîëîâêîé                                                                                    27.3

Çàêëåïêà ïóñòîòåëàÿ ñ ïëîñêîé ãîëîâêîé                                                                  27.8

Çàêëåïêà ïóñòîòåëàÿ ñ ïîòàéíîé ãîëîâêîé                                                                27.9

Çàêëåïêà ïóñòîòåëàÿ ñî ñêðóãëåííîé ãîëîâêîé                                                         27.7

Êâàäðàò                                                                                                                          5.2

Êîíåö áåç ôàñêè                                                                                                            4.1

Êîíåö çàñâåðëåííûé                                                                                                     4.6

Êîíåö êîíè÷åñêèé                                                                                                        4.4

Êîíåö êîíè÷åñêèé ïðèòóïëåííûé                                                                              4.5

Êîíåö ïëîñêèé                                                                                                              4.7

Êîíåö ðåçüáîâûäàâëèâàþùåãî âèíòà                                                                         4.15

Êîíåö ñàìîíàðåçàþùåãî âèíòà êîíè÷åñêèé                                                              4.13

Êîíåö ñàìîíàðåçàþùåãî âèíòà êîíè÷åñêèé ñ ïðèòóïëåíèåì ñ ðåæóùåé êðîìêîé                                                                                                                               4.12

Êîíåö ñàìîíàðåçàþùåãî âèíòà ïëîñêèé                                                                    4.14

Êîíåö ñòóïåí÷àòûé ñ êîíóñîì                                                                                    4.11

Êîíåö ñòóïåí÷àòûé ñî ñôåðîé                                                                                    4.10

Êîíåö ñ ôàñêîé                                                                                                             4.3

Êîíåö ñôåðè÷åñêèé                                                                                                      4.2

Êîíåö öèëèíäðè÷åñêèé                                                                                               4.8

Êîíåö öèëèíäðè÷åñêèé óêîðî÷åííûé                                                                        4.9

Îòâåðñòèÿ, íàêðåñò ðàñïîëîæåííûå                                                                           5.16

Ðåçüáà                                                                                                                             1.1

Ðåçüáà êîíè÷åñêàÿ                                                                                                        1.2

Ðåçüáà ìåòðè÷åñêàÿ                                                                                                      1.5

Ðåçüáà ìåòðè÷åñêàÿ ñ ìåëêèì øàãîì                                                                          1.6

Ðåçüáà ñàìîíàðåçàþùàÿ                                                                                               1.3

Ðåçüáà øóðóïíàÿ                                                                                                            1.4

Ðèôëåíèå ïðÿìîå                                                                                                          5.14

Ðèôëåíèå ñåò÷àòîå                                                                                                       5.15

Ðûì-áîëò                                                                                                                                             18.11

Ñòåðæåíü íîðìàëüíûé                                                                                                 3.1

Ñòåðæåíü ïîëóïóñòîòåëûé                                                                                          3.7

Ñòåðæåíü ïóñòîòåëûé                                                                                                  3.6

Ñòåðæåíü ñòóïåí÷àòûé                                                                                                3.5

Ñòåðæåíü óâåëè÷åííûé                                                                                                3.3

Ñòåðæåíü óìåíüøåííûé                                                                                              3.2

Ñòåðæåíü óòîíåííûé                                                                                                    3.4

Òðåõãðàííèê                                                                                                                  5.3

Óãëóáëåíèå êâàäðàòíîå                                                                                                5.7

Óãëóáëåíèå òðåõãðàííîå                                                                                              5.8

Óãëóáëåíèå øåñòèãðàííîå                                                                                           5.9

Øàéáà êâàäðàòíàÿ                                                                                                        29.2

Øàéáà êîñàÿ                                                                                                                  29.4

Øàéáà êðóãëàÿ ñ êâàäðàòíûì îòâåðñòèåì                                                                 29.3

Øàéáà êðóãëàÿ ïëîñêàÿ                                                                                                29.1

Øàéáà ïðóæèííàÿ                                                                                                        29.5

Øàéáà ïðóæèííàÿ âîëíèñòàÿ                                                                                                                                             29.12

Øàéáà ïðóæèííàÿ äâóõâèòêîâàÿ                                                                                 29.7

Øàéáà ïðóæèííàÿ èçîãíóòàÿ                                                                                       29.8

Øàéáà ïðóæèííàÿ ñ îòîãíóòûìè êîíöàìè                                                                29.6

Øàéáà ïðóæèííàÿ ñ âíóòðåííèìè çóáüÿìè                                                                                                                                             29.14

Øàéáà ïðóæèííàÿ ñ çóáüÿìè ïîä âèíòû ñ ïîòàéíîé è ïîëóïîòàéíîé ãîëîâêîé                                                                                                                                             29.15

Øàéáà ïðóæèííàÿ ñ íàðóæíûìè çóáüÿìè                                                                                                                                             29.13

Øàéáà ñòîïîðíàÿ ñ âíóòðåííèìè çóáüÿìè                                                                                                                                             29.10

Øàéáà ñòîïîðíàÿ ñ âíóòðåííèì íîñêîì                                                                                                                                             29.19

Øàéáà ñòîïîðíàÿ ñ äâóìÿ ëàïêàìè                                                                                                                                             29.16

Øàéáà ñòîïîðíàÿ ñ çóáüÿìè ïîä âèíòû ñ ïîòàéíîé è ïîëóïîòàéíîé ãîëîâêàìè                                                                                                                                    29.11

Øàéáà ñòîïîðíàÿ ñ ëàïêîé                                                                                                                                             29.18

Øàéáà ñòîïîðíàÿ ñ íàðóæíûìè çóáüÿìè                                                                   19.9

Øàéáà ñòîïîðíàÿ ñ íàðóæíûì íîñêîì                                                                                                                                             29.17

Øåñòèãðàííèê                                                                                                               5.1

Øëèö êðåñòîîáðàçíûé                                                                                                 5.12

Øëèö ïðÿìîé                                                                                                                5.11

Øïèëüêà                                                                                                                        26.1

Øïèëüêà ïðèâàðíàÿ                                                                                                     26.4

Øïèëüêà ñ ðåçüáîé ïî âñåé äëèíå                                                                              26.3

Øïèëüêà ñòÿæíàÿ ñ ïðîòî÷êàìè è øåñòèãðàííûì õâîñòîâèêîì                            26.5

Øïèëüêà ñ óòîíåííûì ñòåðæíåì                                                                               26.2

Øïëèíò                                                                                                                          30

Øòèôò êîíè÷åñêèé                                                                                                      25.7

Øòèôò êîíè÷åñêèé ðàçâîäíîé                                                                                    25.6

Øòèôò êîíè÷åñêèé ñ âíóòðåííåé ðåçüáîé                                                                25.8

Øòèôò êîíè÷åñêèé ñ ðåçüáîâîé öàïôîé                                                                   25.9

Øòèôò ïðóæèííûé                                                                                                                                             25.10

Øòèôò ðåçüáîâîé ñ çàñâåðëåííûì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                                    25.15

Øòèôò ðåçüáîâîé ñ êîíè÷åñêèì ïðèòóïëåííûì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                               25.13

Øòèôò ðåçüáîâîé ñ ïëîñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                                             25.12

Øòèôò ðåçüáîâîé ñ ïëîñêèì êîíöîì è øëèöåì                                                                                                                                             25.11

Øòèôò ðåçüáîâîé ñ öèëèíäðè÷åñêèì êîíöîì è øåñòèãðàííûì óãëóáëåíèåì ïîä êëþ÷                                                                                                                               25.14

Øòèôò öèëèíäðè÷åñêèé                                                                                              25.1

Øòèôò öèëèíäðè÷åñêèé íàñå÷åííûé                                                                        25.4

Øòèôò öèëèíäðè÷åñêèé íàñå÷åííûé ñ êîíè÷åñêèìè íàñå÷êàìè                          25.5

Øòèôò öèëèíäðè÷åñêèé ñ âíóòðåííåé ðåçüáîé                                                        25.2

Øòèôò öèëèíäðè÷åñêèé ñ çàñâåðëåííûìè êîíöàìè                                                25.3

Øóðóï ñ êâàäðàòíîé ãîëîâêîé                                                                                    21.2

Øóðóï ñ ïîëóêðóãëîé ãîëîâêîé                                                                                  21.3

Øóðóï ñ ïîëóêðóãëîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                   21.6

Øóðóï ñ ïîëóïîòàéíîé ãîëîâêîé                                                                                21.4

Øóðóï ñ ïîëóïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                 21.7

Øóðóï ñ ïîòàéíîé ãîëîâêîé                                                                                        21.5

Øóðóï ñ ïîòàéíîé ãîëîâêîé è êðåñòîîáðàçíûì øëèöåì                                         21.8

Øóðóï ñ øåñòèãðàííîé ãîëîâêîé                                                                                21.1

III. ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍÎÂ È ÍÀÈÌÅÍÎÂÀÍÈÉ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ ÍÀ ÍÅÌÅÖÊÎÌ ßÇÛÊÅ

Gewinde                                                                                                                          1.1.

Kegliges (konisches) Gewinde                                                                                        1.2.

Blechschraubengewinde                                                                                                  1.3.

Holzschraubengewinde                                                                                                    1.4.

metrisches Gewinde                                                                                                        1.5.

metrisches Feingewinde                                                                                                  1.6.

Sechskantkopf                                                                                                                  2.1.

Sechskantkopf mit Telleransalz                                                                                       2.2.

Sechskantkopf mit Bund                                                                                                   2.3.

Sechskantkopf mit Flansch (Flanschkopf)                                                                        2.4.

Vierkantkopf                                                                                                                    2.5.

Vierkantkopf mit Bund                                                                                                     2.6.

Dreikantkopf mit Bund                                                                                                     2.7.

Achtkantkopf                                                                                                                    2.8.

Zwölfkantkopf mit Flansch                                                                                              2.9.

Hammerkopf                                                                                                                    2.10.

Hammerkopf mit Vierkantansatz                                                                                      2.11.

Halbrundkopf                                                                                                                   2.12.

Flachrundkopf                                                                                                                  2.13.

Halbrundkopf mit Nase                                                                                                    2.14.

Flachrundkopf mit Vierkantansatz                                                                                    2.15.

Halbrundkopf mit Ovalansatz                                                                                          2.16.

Zylinderkopf                                                                                                                    2.17.

Linsenzylinderkopf                                                                                                          2.18.

Linsenkopf                                                                                                                       2.19.

Flachkopf                                                                                                                         2.20.

Senkkopf                                                                                                                          2.21.

abgesetzter mit Senkkopf                                                                                                 2.22.

Senkkopf mit Nase                                                                                                           2.23.

Sekkopf mit Vierkantansatz                                                                                              2.24.

Linsensenkkopf                                                                                                                2.25.

abgesetzter Linsensenkkopf                                                                                             2.26.

Rändelkopf                                                                                                                      2.27.

Kordelkopf                                                                                                                      2.28.

Dickschaft (Schaftdurchmesser = Gewindedurchmesser)                                                3.1.

Dünnschaft (Schaftdurchmesser » Flankendurchmesser)                                                 3.2.

Paßschaft (Schaftdurchmesser > Gewindedurchmesser)                                                 3.3.

Dehnschaft (Schaftdurchmesser < Kerndurchmesser)                                                      3.4.

Ansatzschaft                                                                                                                     3.5.

Hohlschaft                                                                                                                       3.6.

Halbhohlschaft                                                                                                                 3.7.

ohne Kuppe                                                                                                                      4.1.

Linsenkuppe                                                                                                                     4.2.

Kegelkuppe                                                                                                                      4.3.

Spitze                                                                                                                               4.4.

Spitze, abgeflacht                                                                                                            4.5.

Ringschneide                                                                                                                   4.6.

Kegelstumpf                                                                                                                     4.7.

Zapfen                                                                                                                              4.8.

Kernansatz                                                                                                                       4.9.

Ansatzkuppe                                                                                                                    4.10.

Ansatzspitze, abgeflacht                                                                                                  4.11.

Schneidschraubenende mit Schabenut                                                                              4.12.

Blechschrauben - Spitze                                                                                                  4.13.

Blechschrauben - Zapfen                                                                                                 4.14.

Gewindeformendes Schraubenende                                                                                 4.15.

Spitze (Nagelbohrer)                                                                                                       4.16.

Sechskant                                                                                                                         5.1.

Vierkant                                                                                                                           5.2.

Dreikant                                                                                                                           5.3.

Achtkant                                                                                                                           5.4.

Zwölfkant                                                                                                                        5.5.

Innendreikant                                                                                                                   5.6.

Innenvierkant                                                                                                                   5.7.

Innensechskant                                                                                                                 5.8.

Innenkeilprofil                                                                                                                 5.9.

Innenzwölfzahn                                                                                                                5.10.

gerader Schlitz                                                                                                                 5.11.

Kreuzschlitz                                                                                                                     5.12.

Flügel                                                                                                                              5.13.

Rändel                                                                                                                             5.14.

Kordel                                                                                                                             5.15.

Kreuzloch                                                                                                                        5.16.

Sechskantschraube                                                                                                           6.1.

Sechskant - Paßschraube                                                                                                 6.2.

Sechskantschraube mit Zapfen                                                                                         6.3.

Sechskantschrauhe mit Ansatzspitze                                                                                6.4.

Sechskantschraube mit Dehnschaft                                                                                  6.5.

Sechskantschraube mit Bund                                                                                            6.6.

Sechskantschraube mit Flansch                                                                                        6.7.

Vierkantschraube                                                                                                             7.1.

Vierkantschrauhe mit Bund                                                                                              7.2.

Vierkantschraube mit Zapfen                                                                                           7.3.

Vierkantschraube mit Ringschneide                                                                                 7.4.

Vierkantschraube mit Bund und Ansatzkuppe                                                                  7.5.

Dreikantschraube                                                                                                             8.

Achtkantschraube                                                                                                             9.

Zwölfkantschraube mit Flansch                                                                                       10.

Hammerschraube                                                                                                             11.1.

Hammerschraube mit Vierkantansatz                                                                               11.2.

Hammerschraube mit Nase                                                                                              11.3.

Flachrundschraube mit Vierkantansatz                                                                             12.1.

Halbrundschraube mit Nase                                                                                             12.2.

Flachrundschraube mit Nase                                                                                            12.3.

Halbrundschraube mit Ovalansatz                                                                                   12.4.

Senkschraube mit Vierkantansatz                                                                                     13.1.

Senkschraube mit Nase                                                                                                    13.2.

Kegelsenkschraube                                                                                                          13.3.

Zylinderschraube mit Innensechskant                                                                               14.1.

Zylinderschraube mit Innensechskant und Ansatzschaft                                                   14.2.

Senkschrauben mit Innensechskant                                                                                   14.3.

Zylinderschraube mit Schlitz                                                                                           15.1.

Flachkopfschraube mit Schlitz                                                                                         15.2.

Linsenzylinderschraube mit Schlitz                                                                                 15.3.

Linsenzylinderschraube mit Schlitz und Zapfen                                                               15.4.

Linsenzylinderschraube mit Schlitz und Ansatz                                                               15.5.

Linsenzylinderschraube mit Schlitz und Kreuzloch                                                          15.6.

Linsenzylinderschraube mit Schlitz und kleinem Kopf                                                    15.7.

Senkschraube mit Schlitz                                                                                                 15.8.

Senkschraube mit Schlitz und Zapfen                                                                               15.9.

Linsensenkschraube mit Schlitz                                                                                                                                             15.10.

Linsensenkschraube mit Schlitz und Zapfen                                                                                                                                             15.11.

Senkschraube mit Halteschlitz                                                                                                                                             15.12.

Halbrundschraube mit Schlitz                                                                                                                                             15.13.

Linsenschraube mit Kreuzschlitz und Dehnschaft                                                            16.1.

Senkschraube mil Kreuzschlitz                                                                                        16.2.

Linsensenkschraube mit Kreuzschlitz                                                                              16.3.

Flachkopfschraube mit Kreuzschlitz                                                                                16.4.

Sechskantschraube mit unverlierbarer Scheibe                                                               17.1.

Sechskantschraube mit unverlierbarem Federring und Scheibe                                       17.2.

Linsenzylinderschraube mit unverlierbarem Federring                                                    17.3.

Linsensenkschraube mit unverlierbarer Fächerscheibe                                                   17.4.

Augenschraube                                                                                                                18.1.

Bogenklammerschraube                                                                                                   18.2.

Flachklammerschraube                                                                                                    18.3.

Tellerschraube mit Nasen                                                                                                18.4.

Hakenschraube                                                                                                                18.5.

Hutschraube                                                                                                                     18.6.

Kegelschraube                                                                                                                 18.7.

Steinschraube                                                                                                                  18.8.

Steinschraube                                                                                                                  18.9.

Flügelschraube                                                                                                                                             18.10.

Ringschraube                                                                                                                                             18.11.

Gewindestift mit Schlitz und Kegelstumpf                                                                       19.1.

Gewindestift mit Schlitz und Zapfen                                                                                19.2.

Gewindestift mit Schlitz und Ringschneide                                                                     19.3.

Gewindestift mit Schlitz und Spitze                                                                                 19.4.

Gewindestift mit Innensechskant und Kegelstumpf                                                          19.5.

Gewindestift mit Innensechskant und Zapfen                                                                   19.6.

Gewindestift mit Innensechskant und Ringschneide                                                         19.7.

Gewindestifl mil Innensechskant und Spitze                                                                    19.8.

Sechskantblechschraube                                                                                                  20.1.

Zylinderblechschraube mit Schlitz                                                                                   20.2.

Senkblechschraube mit Schlitz                                                                                        20.3.

Linsensenkblechschraube mit Schlitz                                                                               20.4.

Senkblechschraube mit Kreuzschlitz                                                                                20.5.

Linsensenkblechschraube mit Kreuzschlitz                                                                      20.6.

Flachkopf-Blechschraube mit Kreuzschlitz                                                                     20.7.

Sechskantholzschraube                                                                                                    21.1.

Vierkantholzschraube                                                                                                      21.2.

Halbrundholzschraube mit Schlitz                                                                                   21.3.

Linsensenkbolzschraube mit Schlitz                                                                                21.4.

Senkholzschraube mit Schlitz                                                                                          21.5.

Halbrundholzschraube mit Kreuzschlitz                                                                          21.6.

Linsensenkholzschraube mit Kreuzschlitz                                                                        21.7.

Senkholzschraube mit Kreuzschlitz                                                                                  21.8.

Sechskant-Schneidschraube                                                                                             22.1.

Zylinder-Schneidschraube mit Schlitz                                                                             22.2.

Senk-Schneidschraube mit Schlitz                                                                                   22.3.

Linsensenk-Schneidschraube mit Schlitz                                                                         22.4.

Linsenzylinder-Schneidschraube mit Kreuzschlitz                                                           22.5.

Senk-Schneidschraube mit Kreuzschlitz                                                                          22.6.

Linsensenk-Schneidschraube mit Kreuzschlitz                                                                22.7.

Sechskantschraube, gewindefurchend                                                                              23.

Rändelschraube                                                                                                               24.1.

Rändelschraube mit Spitze                                                                                              24.2.

Rändelschraube mit Ansatzspitze                                                                                    24.3.

Rändelschraube mit Ringschneide                                                                                   24.4.

Rändelschraube mit Linsenkuppe                                                                                    24.5.

Rändelschraube mit Zapfen                                                                                             24.6.

Zylinderstift                                                                                                                     25.1.

Zylinderstift mit Innengewinde                                                                                        25.2.

Nietstift                                                                                                                            25.3.

Zylinderkerbstift                                                                                                              25.4.

Kegelkerbstift                                                                                                                  25.5.

Kegelstift mit Spreizende                                                                                                25.6.

Kegelstift                                                                                                                         25.7.

Kegelstift mit Innengewinde                                                                                            25.8.

Kegelstift mit Gewindezapfen                                                                                         25.9.

Spannstift                                                                                                                                             25.10.

Gewindestift mit Schlitz, Schaft und Kegelstumpf                                                                                                                                             25.11.

Gewindestift mit Innensechskant, Schaft und Kegelstumpf                                                                                                                                             25.12.

Gewindestift mit Innensechskant, Schaft und Spitze                                                                                                                                             25.13.

Gewindestift mit Innensechskant, Schaft und Zapfen                                                                                                                                             25.14.

Gewindestift mit Innensechskant, Schaft und Ringschneide                                                                                                                                             25.15.

Stiftschraube                                                                                                                    26.1.

Stiftschraube mit Dehnschaft                                                                                           26.2.

Gewindebolzen                                                                                                                26.3.

Anschweißende                                                                                                               26.4.

Schraubenbolzen ohne Dehnschaft und Zapfen                                                                26.5.

Halbrundniet                                                                                                                    27.1.

Flachrundniet                                                                                                                   27.2.

Senkniet                                                                                                                           27.3.

Linsenniet                                                                                                                        27.4.

flacher Linsenniet                                                                                                            27.5.

Flachkopfniet                                                                                                                   27.6.

Hohlniet mit Linsenkopf                                                                                                  27.7.

Hohlniet mit Flachkopf                                                                                                    27.8.

Hohlniet mit Senkkopf                                                                                                     27.9.

Halb-Hohlniet mit Flachkopf                                                                                                                                             27.10.

Halb-Hohlniet mit Senkkopf                                                                                                                                             27.11.

Halb-Hohlniet mit Halbrundkopf                                                                                                                                             27.12.

Sechskantmutter                                                                                                               28.1.

Flache Sechskantmutter                                                                                                   28.2.

Sechskantmutter mit Bund                                                                                                28.3.

Sechskantmutter mit Flansch                                                                                            28.4.

Sechskantmutter mil Ansatz                                                                                             28.5.

Sechskant-Anschweißmutter                                                                                            28.6.

Vierkantmutter                                                                                                                 28.7.

Flache Vierkantmutter                                                                                                      28.8.

Ankermutter                                                                                                                     28.9.

Vierkantmutter mit Bund                                                                                                                                             28.10.

Vierkant-Anschweißmutter                                                                                                                                             28.11.

Dreikantmutter mit Bund                                                                                                                                             28.12.

Achtkantmutter                                                                                                                                             28.13.

Zwölfkantmutter mit Flansch                                                                                                                                             28.14.

Sechskantmutter mit Klemmteil, ganzmetallisch                                                                                                                                             28.15.

Sechskantmutter mit Klemmteil, mit nichtmetallischem Einsatz                                                                                                                                             28.16.

Kronenmutter                                                                                                                                             28.17.

Kronenmutter                                                                                                                                             28.18.

Flache Kronenmutter                                                                                                                                             28.19.

Hutmutter                                                                                                                                             28.20.

Rändelmutter                                                                                                                                             28.21.

Schlitzmutter                                                                                                                                             28.22.

Nutmutter                                                                                                                                             28.23.

Kreuzlochmutter                                                                                                                                             28.24.

Zweilochmulter                                                                                                                                             28.25.

Flügelmutter                                                                                                                                             28.26.

Scheibe                                                                                                                            29.1.

Vierkantscheibe                                                                                                               29.2.

Scheibe mit Vierkantloch                                                                                                 29.3.

Keilscheibe                                                                                                                     29.4.

Federring                                                                                                                         29.5.

Federring, aufgebogen                                                                                                     29.6.

Mehrfachfederring                                                                                                           29.7.

Federscheibe, gewölbt                                                                                                    29.8.

Fächerscheibe, außen gezahnt                                                                                          29.9.

Fächerscheibe, innen gezahnt                                                                                                                                             29.10.

Fächerscheibe, außen gezahnt, keglig                                                                                                                                             29.11.

Federscheibe, gewellt                                                                                                                                             29.12.

Zahnscheibe, innen gezahnt                                                                                                                                             29.13.

Zahnscheibe, außen gezahnt                                                                                                                                             29.14.

Zahnscheibe, außen gezahnt, keglig                                                                                                                                             29.15.

Sicherungsblech mit zwei Lappen                                                                                                                                             29.16.

Sicherungsblech mit Nase, außen                                                                                                                                             29.17.

Sicherungsblech mit Lappen                                                                                                                                             29.18.

Sicherungsblech mit Nase, innen                                                                                                                                             29.19.

Splint                                                                                                                               30.

IV. ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍÎÂ È ÍÀÈÌÅÍÎÂÀÍÈÉ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ ÍÀ ÀÍÃËÈÉÑÊÎÌ ßÇÛÊÅ

Screw thread                                                                                                                   1.1.

Taper screw thread                                                                                                          1.2.

Tapping screw thread                                                                                                      1.3.

Wood screw thread                                                                                                         1.4.

Metric thread (SI)                                                                                                            1.5.

Metric fine pitch thread                                                                                                   1.6.

Hexagon head                                                                                                                  2.1.

Hexagon head with washer face                                                                                      2.2.

Hexagon head with collar                                                                                                2.3.

Hexagon head with flange                                                                                                2.4.

Square head                                                                                                                     2.5.

Square head with collar                                                                                                   2.6.

Triangle head with collar                                                                                                2.7.

Octagonal head                                                                                                                2.8.

12point flange head                                                                                                         2.9.

T-head                                                                                                                             2.10.

T-head with square neck                                                                                                  2.11.

Round head                                                                                                                      2.12.

Mushroom head                                                                                                               2.13.

Round head with nib                                                                                                        2.14.

Mushroom head with square neck                                                                                    2.15.

Round head with oval neck                                                                                              2.16.

Cheese head                                                                                                                     2.17.

Raised cheese head                                                                                                         2.18.

Binding head                                                                                                                    2.19.

Pan head                                                                                                                          2.20.

Countersunk head                                                                                                             2.21.

Undercut countersunk head                                                                                              2.22.

Countersunk head with nib                                                                                               2.23.

Countersunk head with square neck                                                                                 2.24.

Raised countersunk heart                                                                                                 2.25.

Undercut raised countersunk head                                                                                   2.26.

Straight knurled head                                                                                                       2.27.

Diamond knurled head                                                                                                     2.28.

Normal shank                                                                                                                   3.1.

Reduced shank                                                                                                                 3.2.

Increased shank                                                                                                               3.3.

Waisted shank                                                                                                                  3.4.

Shoulder                                                                                                                          3.5.

Tubular shank                                                                                                                  3.6.

Semi-tubular shank                                                                                                          3.7.

As-rolled end                                                                                                                  4.1.

Rounded end                                                                                                                    4.2.

Chamfered end                                                                                                                 4.3.

Cone point                                                                                                                       4.4.

Truncated cone point                                                                                                       4.5.

Cup point                                                                                                                         4.6.

Flat point                                                                                                                         4.7.

Long dog point                                                                                                                 4.8.

Short dog point                                                                                                                4.9.

Short dog point with rounded end                                                                                    4.10.

Short dog point with truncated cone end                                                                          4.11.

Scrape point                                                                                                                    4.12.

4.14. End for self-tapping screw                                                                                     4.13.

End for thread rolling screw                                                                                            4.15.

Gimlet                                                                                                                              4.16.

Hexagon                                                                                                                           5.1.

Square                                                                                                                             5.2.

Triangle                                                                                                                           5.3.

Octagon                                                                                                                           5.4.

12point                                                                                                                            5.5.

Triangle                                                                                                                           5.6.

Square socket                                                                                                                  5.7.

Hexagon socket                                                                                                                5.8.

Six-spline socket                                                                                                             5.9.

12point socket                                                                                                                 5.10.

Slot                                                                                                                                  5.11.

Cross recess                                                                                                                    5.12.

Wing                                                                                                                                5.13.

Straight knurl                                                                                                                   5.14.

Diamond knurl                                                                                                                 5.15.

Cross hole                                                                                                                       5.16.

Hexagon holt                                                                                                                    6.1.

Hexagon fit bolt                                                                                                               6.2.

Hexagon set screw with full dog point                                                                            6.3.

Hexagon set screw with half dog point and flat cone point                                              6.4.

Hexagon screw with waisted shank                                                                                 6.5.

Hexagon bolt with collar                                                                                                 6.6.

Hexagon bolt with flange                                                                                                 6.7.

Square head bolt                                                                                                              7.1.

Square head bolt with collar                                                                                           7.2.

Square set screw with half dog point                                                                               7.3.

Square set screw with cup point                                                                                      7.4.

Square set screw with collar and half dog point with rounded end                                 7.5.

Triangle head bolt with collar                                                                                         8.

Octagon bolt                                                                                                                    9.

12point flange screw                                                                                                       10.

T-head bolt                                                                                                                      11.1.

T-head bolt with square neck                                                                                          11.2.

T-head bolt with double nib                                                                                            11.3.

Mushroom head square neck bolt                                                                                    12.1.

Cup head nib bolt                                                                                                            12.2.

Mushroom head nib bolt                                                                                                  12.3.

Cup oval neck bolt                                                                                                           12.4.

Flat countersunk square neck bolt                                                                                    13.1.

Flat countersunk nib bolt                                                                                                 13.2.

Deep flat countersunk bolt                                                                                               13.3.

Hexagon socket head cap screw                                                                                      14.1.

Hexagon socket head shoulder screw                                                                              14.2.

Hexagon socket countersunk cap head screw                                                                  14.3.

Slotted cheese head screw                                                                                               15.1.

Slotted pan head screw                                                                                                    15.2.

Slotted raised cheese head screw                                                                                    15.3.

Slotted raised cheese head screw with full dog point                                                      15.4.

Slotted raised cheese head fit bolt                                                                                   15.5.

Slotted capstan screw                                                                                                      15.6.

Slotted small raised cheese head screw                                                                          15.7.

Slotted countersunk head screw                                                                                       15.8.

Slotted countersunk head screw with full dog point                                                        15.9.

Slotted raised countersunk head screw                                                                                                                                             15.10.

Slotted raised countersunk head screw with full dog point                                                                                                                                             15.11.

Countersunk head screw with forgel slot                                                                                                                                             15.12.

Slotted round head screw                                                                                                                                             15.13.

Cross recessed raised cheese head screw                                                                       16.1.

Cross recessed countersunk head screw                                                                          16.2.

Cross recessed raised countersunk head screw                                                               16.3.

Cross recessed pan head screw                                                                                       16.4.

Hexagon screw with captive plain washer                                                                      17.1.

Hexagon screw with captive spring and plain washer                                                     17.2.

Raised cheese head screw with captive spring washer                                                   17.3.

Raised countersunk head screw with captive countersunk serrated lock washer             17.4.

Eye bolt                                                                                                                           18.1.

Mushroom head anchor bolt                                                                                            18.2.

Flat head anchor bolt                                                                                                       18.3.

Belting bolt                                                                                                                      18.4.

Clip bolt                                                                                                                          18.5.

Acorn hexagon head bolt                                                                                                 18.6.

Conical bolt                                                                                                                     18.7.

Masonry bolt                                                                                                                   18.8.

Foundation bolt                                                                                                                18.9.

Wing screw                                                                                                                                             18.10.

Lifting eye bolt                                                                                                                                             18.11.

Slotted set screw with flat point                                                                                      19.1.

Slotted set screw with full dog point                                                                               19.2.

Slotted set screw with cup point                                                                                      19.3.

Slotted set screw with cone point                                                                                    19.4.

Hexagon socket set screw with flat point                                                                        19.5.

Hexagon socket set screw with full dog point                                                                 19.6.

Hexagon socket screw with cup point                                                                             19.7.

Hexagon socket set screw with cone point                                                                      19.8.

Hexagon head tapping screw                                                                                           20.1.

Slotted pan head tapping screw                                                                                       20.2.

Slotted countersunk head tapping screw                                                                          20.3.

Slotted raised countersunk head tapping screw                                                               20.4.

Cross recessed countersunk head tapping screw                                                             20.5.

Cross recessed raised countersunk head tapping screw                                                  20.6.

Cross recessed pan head tapping screw                                                                          20.7.

Hexagon head wood screw                                                                                              21.1.

Square head wood screw                                                                                                21.2.

Slotted round head wood screw                                                                                      21.3.

Slotted raised countersunk head wood screw                                                                  21.4.

Slotted countersunk head wood screw                                                                             21.5.

Cross recessed pan head wood screw                                                                             21.6.

Cross recessed raised countersunk head wood screw                                                     21.7.

Cross recessed countersunk head wood screw                                                                21.8.

Hexagon head thread cutting screw                                                                                 22.1.

Slotted cheese head thread cutting screw                                                                        22.2.

Slotted countersunk head thread cutting screw                                                                22.3.

Slotted raised countersunk head thread cutting screw                                                      22.4.

Cross recessed pan head thread cutting screw                                                                 22.5.

Cross recessed countersunk head thread cutting screw                                                    22.6.

Cross recessed raised countersunk head thread cutting screw                                         22.7.

Hexagon head thread forming screw                                                                                23.

Straight knurled head screw                                                                                            24.1.

Straight knurled head screw with cone point                                                                   24.2.

Straight knurled head screw with short dog point with truncated cone end                     24.3.

Straight knurled head screw with cup point                                                                     24.4.

Straight knurled head screw with rounded point                                                              24.5.

Straight knurled head screw with full dog point                                                              24.6.

Cylindrical pin                                                                                                                25.1.

Cylindrical pin with internal thread                                                                                 25.2.

Cylindrical pin with cup points                                                                                       25.3.

Cylindrical notched pin                                                                                                   25.4.

Cylindrical notched pin with conical notches                                                                  25.5.

Tension taper pin                                                                                                             25.6.

Taper pin                                                                                                                         25.7.

Taper pin with internal thread                                                                                         25.8.

Taper pin with threaded stem                                                                                          25.9.

Spring type straight pin                                                                                                                                             25.10.

Slotted headless screw with flat chamfered end                                                                                                                                             25.11.

Hexagon socket headless screw with flat chamfered end                                                                                                                                             25.12.

Hexagon socket headless screw with truncated cone point                                                                                                                                             25.13.

Hexagon socket headless screw with full dog point                                                                                                                                             25.14.

Hexagon socket headless screw with cup point                                                                                                                                             25.15.

Stud                                                                                                                                 26.1.

Waisted stud                                                                                                                    26.2.

Stud bolt                                                                                                                          26.3.

Weld stud                                                                                                                        26.4.

Double end stud with full shank                                                                                       26.5.

Round head rivet                                                                                                             27.1.

Mushroom head rivet                                                                                                       27.2.

Countersunk head rivet                                                                                                    27.3.

Raised countersunk head rivet                                                                                         27.4.

Shallow raised countersunk head rivet                                                                            27.5.

Flat head rivet                                                                                                                 27.6.

Round head hollow rivet                                                                                                 27.7.

Flat head hollow rivet                                                                                                     27.8.

Countersunk head hollow rivet                                                                                        27.9.

Flat head semi-hollow rivet                                                                                                                                             27.10.

Countersunk head semi-hollow rivet                                                                                                                                             27.11.

Round head semi-hollow rivet                                                                                                                                             27.12.

Hexagon nut                                                                                                                     28.1.

Hexagon thin nut                                                                                                              28.2.

Hexagon nut with collar                                                                                                   28.3.

Hexagon nut with flange                                                                                                  28.4.

Washer faced hexagon nut                                                                                               28.5.

Hexagon weld nut                                                                                                            28.6.

Square nut                                                                                                                        28.7.

Square thin nut without chamfer                                                                                       28.8.

Foundation nut                                                                                                                 28.9.

Square nut with collar                                                                                                                                             28.10.

Square weld nut                                                                                                                                             28.11.

Triangle nut with collar                                                                                                                                             28.12.

Octagon nut                                                                                                                                             28.13.

12point flange nut                                                                                                                                             28.14.

Prevailing torque type hexagon nut with deformed thread                                                                                                                                             28.15.

Prevailing torque type hexagon nut with ring polymer insert                                                                                                                                             28.16.

Hexagon slotted nut                                                                                                                                             28.17.

Hexagon castle nut                                                                                                                                             28.18.

Hexagon thin castle nut                                                                                                                                             28.19.

Acorn nut                                                                                                                                             28.20.

Knurled nut                                                                                                                                             28.21.

Slotted round nut                                                                                                                                             28.22.

Slotted round nut for hook-spanner                                                                                                                                             28.23.

Round nut with set pin holes in side                                                                                                                                             28.24.

Round nut with drilled holes in one face                                                                                                                                             28.25.

Wing nut                                                                                                                                             28.26.

Plain washer                                                                                                                    29.1.

Square washer with round hole                                                                                       29.2.

Round washer with square hole                                                                                       29.3.

Square taper washer                                                                                                        29.4.

Single coil spring lock washer with square ends                                                             29.5.

Single coil spring lock washer with tang ends                                                                 29.6.

Double coil spring lock washer                                                                                       29.7.

Curvet spring washer                                                                                                       29.8.

Serrated lock washer external teeth                                                                                 29.9.

Serrated lock washer internal teeth                                                                                                                                             29.10.

Countersunk serrated external toothed lock washer                                                                                                                                             29.11.

Wave spring washer                                                                                                                                             29.12.

Lock washer external teeth                                                                                                                                             29.13.

Lock washer internal teeth                                                                                                                                             29.14.

Countersunk external toothed lock washer                                                                                                                                             29.15.

Tab washer with long tab and wing                                                                                                                                             29.16.

External tab washer                                                                                                                                             29.17.

Tab washer with long tab                                                                                                                                             29.18.

Internal tab washer                                                                                                                                             29.19.

Split pin                                                                                                                           30.

V. ÓÊÀÇÀÒÅËÜ ÒÅÐÌÈÍÎÂ È ÍÀÈÌÅÍÎÂÀÍÈÉ ÊÐÅÏÅÆÍÛÕ ÈÇÄÅËÈÉ ÍÀ ÔÐÀÍÖÓÇÑÊÎÌ ßÇÛÊÅ

Filetage cylindrique                                                                                                         1.1.

Filetage conique                                                                                                              1.2.

Filetage de vis à tôle                                                                                                       1.3.

Filetage de vis à bois                                                                                                      1.4.

Filetage métrique (SI)                                                                                                      1.5.

Filetage métrique à pas fin                                                                                              1.6.

Tête hexagonale                                                                                                               2.1.

Tête hexagonale à collerette                                                                                            2.2.

Tête hexagonale à embase cylindrique                                                                            2.3.

Tête hexagonale à embase cylindro-tronconique                                                             2.4.

Tête carrée                                                                                                                      2.5.

Tête carrée à embase cylindrique                                                                                    2.6.

Tête triangulaire à embase cylindrique                                                                            2.7.

Tête octogonale                                                                                                               2.8.

Tête binexagonale                                                                                                            2.9.

Tête rectangulaire à angles abattus                                                                                  2.10.

Tête rectangulaire à angles abattus à collet carré                                                            2.11.

Tête ronde                                                                                                                       2.12.

Tête bombée                                                                                                                    2.13.

Tête ronde à ergot                                                                                                            2.14.

Tête bombée à collet carré                                                                                              2.15.

Tête ronde a collet carré large                                                                                        2.16.

Tête cylindrique                                                                                                              2.17.

2.19. Tête cylindrique bombée                                                                                        2.18.

Tête cylindrique à dépouille                                                                                            2.20.

Tête fraisée                                                                                                                      2.21.

Tête fraisée à épaulement                                                                                                2.22.

Tête fraisée à ergot                                                                                                          2.23.

Tête fraisée à collet carré                                                                                                2.24.

Tête fraisée bombée                                                                                                        2.25.

Tête fraisée bombée à épaulement                                                                                   2.26.

Tête cylindrique moletée                                                                                                 2.27.

Tête moletée croisé                                                                                                         2.28.

Tige normale                                                                                                                   3.1.

Tige réduite                                                                                                                     3.2.

Tige ajustable                                                                                                                  3.3.

Tige allégeé                                                                                                                     3.4.

Tige ajustable à bout fileté réduit                                                                                    3.5.

Tige tubulaire                                                                                                                  3.6.

Tige demi-tubulaire                                                                                                         3.7.

Bout plat                                                                                                                          4.1.

Bout bombé                                                                                                                     4.2.

Bout chanfreiné                                                                                                                4.3.

Bout pointu                                                                                                                      4.4.

Bout pilote                                                                                                                       4.5.

Cuvette                                                                                                                            4.6.

Bout chanfreiné                                                                                                                4.7.

Téton long                                                                                                                        4.8.

Òéton court                                                                                                                      4.9.

Téton court bombé                                                                                                           4.10.

Téton tronconique                                                                                                            4.11.

Bout tronconique de vis à tôle                                                                                         4.12.

Bout pointu de vis à tôle                                                                                                  4.13.

Bout plat de vis à tôle                                                                                                      4.14.

Bout de vis auto-taraudeuse par déformation de matière                                                 4.15.

Foret                                                                                                                                4.16.

Hexagonal                                                                                                                        5.1.

Carré                                                                                                                               5.2.

Triangulaire                                                                                                                     5.3.

Oclogonal                                                                                                                        5.4.

Bihexagonal                                                                                                                     5.5.

Triangle creux                                                                                                                 5.6.

Carré creux                                                                                                                      5.7.

Six pans creux                                                                                                                 5.8.

Empreinte six cannelures                                                                                                 5.9.

Empreinte bihexagonale                                                                                                  5.10.

Fente                                                                                                                                5.11.

Empreinte cruciforme                                                                                                      5.12.

Oreilles                                                                                                                           5.13.

Moleté                                                                                                                             5.14.

Moleté croisé                                                                                                                  5.15.

Percage en croix                                                                                                              5.16.

Vis à tête hexagonale                                                                                                       6.1.

Corps de boulon ajustable à tête hexagonale avec gorge de dégagement                         6.2.

Vis à tête hexagonale à téton avec gorge de digagement                                                  6.3.

Vis à tête hexagonale, à téton cylindro-tronconique                                                        6.4.

Vis à tete hexagonale à tige allégée                                                                                 6.5.

Vis à tête hexagonale à embase cylindrique                                                                    6.6.

Vis à tête hexagonale à embase cylindlro-tronconique                                                    6.7.

Vis à tête carrée                                                                                                               7.1.

Vis à tête carrée à embase cylindrique                                                                            7.2.

Vis à tête carrée à teton court                                                                                          7.3.

Vis à tête carrée à cuvette                                                                                                7.4.

Vis à tête carrée à embase cylindrique à teton count                                                       7.5.

Vis à tête triangulaire à embase cylindrique                                                                    8.

Vis à tête octogonale                                                                                                       9.

Vis à tête bihexagonal                                                                                                      10.

Vis à tête rectangulaire à angles abattus                                                                          11.1.

Vis à tête rectangulaire à angles abattus à collet carré                                                    11.2.

Vis à tête rectangulaire à angles abattus à deux ergots                                                    11.3.

Corps de boulon à tête bombée aplatie, à collet carré                                                     12.1.

Corps de boulon à tête ronde, à ergot                                                                              12.2.

Corps de boulon à tête bombee, à ergot                                                                           12.3.

Corps de boulon à tête rondo, à collet carré large                                                           12.4.

Corps de boulon à tête fraisée, à collet carré                                                                  13.1.

Corps de boulon à tête fraisee, à ergot                                                                            13.2.

Corps de boulon de roue                                                                                                 13.3.

Vis à tête cylindrique a six pans creux                                                                            14.1.

Vis ajustable à tête cylindrique a six pans creux et à bout fileté réduite                          14.2.

Vis à tête fraisée à six pans creux                                                                                    14.3.

Vis à tête cylindrique fendue                                                                                           15.1.

Vis à tête cylindrique à depouille fendue                                                                        15.2.

Vis à tête cylindrique bombée large fendue                                                                     15.3.

Vis à tête cylindrique bombée mince fendue, à téton                                                       15.4.

Vis à tête cylindrique bombée mince fendue, à tige ajustable                                          15.5.

Vis à tête cylindrique bombée fendue avec percage en croix                                          15.6.

Vis à tête cylindrique bombée réduite fendue                                                                  15.7.

Vis à tête fraisée fendue                                                                                                  15.8.

Vis à tête fraisée fendue, à téton                                                                                      15.9.

Vis à tête fraisée bombée fendue                                                                                                                                             15.10.

Vis à tête fraisée bombée fendue, à téton                                                                                                                                             15.11.

Vis à tête fraisée à empreinte rectangulaife ou à fente forgée                                                                                                                                             15.12.

Vis à tête ronde fendue                                                                                                                                             15.13.

Vis à tête cylindrique bombée à empreinte cruciforme                                                    16.1.

Vis à tête fraisée à empreinte cruciforme                                                                        16.2.

Vis à tête fraisée bombée à empreinte cruciforme                                                           16.3.

Vis à tête cylindrique à dépouille à empreinte cruciforme                                              16.4.

Vis à tête hexagonale à rondelle cylindrique plate incorporée                                        17.1.

Vis à tête hexagonale à rondelles (élastique et cylindrique plate) incorporées               17.2.

Vis à tête cylindrique bombée, à rondelle élastique incorporée                                      17.3.

Vis à tête fraisée bombée fendue, à rondelee à dents extérieures, concave, incorporée  17.4.

Corps de boulon à oeil                                                                                                    18.1.

Corps de boulon à tête bombée à agrafe (1 ou 2)                                                            18.2.

Corps de boulon à tête plate à agrafe (1 ou 2)                                                                 18.3.

Corps de boulon de courroie                                                                                           18.4.

Crampon fileté                                                                                                                 18.5.

Vis à tête hexagonale à calotte                                                                                         18.6.

Vis conique                                                                                                                      18.7.

Tige de scellement à queue de carpe                                                                               18.8.

Tige de scellement                                                                                                           18.9.

Vis à oreilles                                                                                                                                             18.10.

Vis à anneau                                                                                                                                             18.11.

Vis sans tête, fendue, entiérement filetée, à bout chanfreiné                                            19.1.

Vis sans tête, fendue, entiérement filetée, à téton                                                             19.2.

Vis sans tête, fendue, entiérement filetée, à cuvette                                                         19.3.

Vis sans tête, fendue, entiérement filetée, à bout pointu                                                   19.4.

Vis sans tête, à six pans creux, entierement filetée, à bout chanfreiné                             19.5.

Vis sans tête, à six pans creux, entierement filetée, à téton                                              19.6.

Vis sans tête, à six pans crciix, entierement filelée, à cuvette                                         19.7.

Vis sans tête, à six pans creux, entierement filutée, à bout pointu                                    19.8.

Vis à tôle à tête hexagonale, à bout pointu; à bout plat                                                    20.1.

Vis à tôle à tête cylindrique à depouille fendue, à bout pointu; à bout plat                      20.2.

Vis à tôle à tête fraisée fendue, à bout pointu; à bout plat                                                20.3.

Vis à tôle à tête fraisée bombée fendue, à bout pointu; à bout plat                                  20.4.

Vis à tôle à tête fraisée à empreinte cruciforme, à bout pointu; à bout plat                     20.5.

Vis à tôle à tête fraisée bombée à empreinte cruciforme, à bout pointu; à bout plat        20.6.

Vis à tôle à tête cylindrique à depouille à empreinte cruciforme, à bout pointu; à bout plat                                                                                                                                             20.7.

Vis à bois à tête hexagonale                                                                                            21.1.

Vis à bois à tête carrée                                                                                                    21.2.

Vis à bois à tête ronde fendue                                                                                          21.3.

Vis à bois à tête fraisée bombée fendue                                                                          21.4.

Vis à bois à tête fraisée fendue                                                                                        21.5.

Vis à bois à tête ronde à empreinte cruciforme                                                               21.6.

Vis à bois à tête fraisée bombée à empreinte cruciforme                                                21.7.

Vis à bois à tête fraisée à empreinte cruciforme                                                              21.8.

Vis auto-taraudeuse à tête hexagonale                                                                             22.1.

Vis auto-taraudeuse à tête cylindrique fendue                                                                 22.2.

Vis auto-taraudeuse à tête fraisfée fendue                                                                       22.3.

Vis auto-taraudeuse à tête fraisée bombée fendue                                                           22.4.

Vis auto-taraudeuse à tête cylindrique à dépouille à empreinte cruciforme                    22.5.

Vis auto-taraudeuse à tête fraisée à empreinte cruciforme                                              22.6.

Vis auto-taraudeuse à tête fraisée bombée à empreinte cruciforme                                 22.7.

Vis auto-taraudeus par deformation de matiére                                                               23.

Vis à tête cylindrique moletée                                                                                         24.1.

Vis à tête cylindrique moletée, à bout pointu                                                                   24.2.

Vis à tête cylindrique moletée à téton cylindro-tronconique                                            24.3.

Vis à tête cylindrique moletée à cuvette                                                                          24.4.

Vis à tête cylindrique moletée à bout bombée                                                                 24.5.

Vis à tête cylindrique moletée à téton long                                                                      24.6.

Goupille cylindrique                                                                                                       25.1.

Goupille cylindrique à filet femelle                                                                                25.2.

Goupille cylindrique à cuvette                                                                                        25.3.

Goupille cylindrique à taille                                                                                           25.4.

Goupille cylindrique à tailles coniques                                                                           25.5.

Goupille conique fendue                                                                                                  25.6.

Goupille cunique                                                                                                             25.7.

Goupille conique à filet femelle                                                                                      25.8.

Goupille conique à tourillon fileté                                                                                  25.9.

Goupille elastique                                                                                                                                             25.10.

Vis sans tête fendue, partiellement filetée, à bout chanfreiné                                                                                                                                             25.11.

Vis sans tête à six pans creux, partiellement, filetée, à bout chanfreiné                                                                                                                                             25.12.

Vis sans tête à six pans creux, partiellement filetée, à bout pointu                                                                                                                                             25.13.

Vis sans tête à six pans creux, partiellement filetée, à téton                                                                                                                                             25.14.

Vis sans tête à six pans creux, partiellement filetée, à cuvette                                                                                                                                             25.15.

Goujon                                                                                                                             26.1.

Goujon à corps allégé                                                                                                      26.2.

Tige filetée                                                                                                                      26.3.

Tige à sounde                                                                                                                  26.4.

Goujon à deux gorges de dégagement et à téton                                                               26.5.

Rivet à tête ronde                                                                                                            27.1.

Rivet à tête bombée                                                                                                         27.2.

Rivet à tête fraisée                                                                                                           27.3.

Rivet à tête fraisée bombée                                                                                             27.4.

Rivet à tête fraisée bombée bas                                                                                       27.5.

Rivet à tête plate                                                                                                              27.6.

Rivet cretix à tête ronde                                                                                                  27.7.

Rivet creux à tête plate                                                                                                    27.8.

Rivet creux à tête fraisée                                                                                                 27.9.

Rivet semi-creux à tête plate                                                                                                                                             27.10.

Rivet semi-crcux à tête fraisée                                                                                                                                             27.11.

Rivet semi-creux à tête ronde                                                                                                                                             27.12.

Ecrou hexagonal                                                                                                              28.1.

Ecrou hexagonal bas                                                                                                        28.2.

Ecrou hexagonal à embase cylindrique                                                                            28.3.

Ecrou hexagonal à embase cylindro-tronconique                                                            28.4.

Ecrou hexagonal à collerette                                                                                           28.5.

Ecrou hexagonal à souder                                                                                                28.6.

Ecrou carré                                                                                                                      28.7.

Ecrou carre bas                                                                                                               28.8.

Ecrou de tige d’ancrage                                                                                                   28.9.

Ecrou carré à embase cylindrique                                                                                                                                             28.10.

Ecrou carré à souder                                                                                                                                             28.11.

Ecrou triangulaire à embase cylindrique                                                                                                                                             28.12.

Ecrou octogonal                                                                                                                                             28.13.

Ecrou bihexagonal                                                                                                                                             28.14.

Ecrou auto-freiné hexagonal à filet déformé                                                                                                                                             28.15.

Ecrou auto-freiné hexagonal anneau polimére                                                                                                                                             28.16.

Ecrou hexagonal à créneaux                                                                                                                                             28.17.

Ecrou hexagonal à créneaux dégagés                                                                                                                                             28.18.

Ecrou hexagonal bas à creneaux dégagés                                                                                                                                             28.19.

Ecrou borgne à calotte                                                                                                                                             28.20.

Ecrou moleté                                                                                                                                             28.21.

28.23. Ecrou cylindrique à fente                                                                                                                                             28.22.

Ecrou cylindrique à trous percés en croix                                                                                                                                             28.24.

Ecrou cylindrique à deux trous percés sur une fase                                                                                                                                             28.25.

Ecrou à oreilles                                                                                                                                             28.26.

Rondelle plats                                                                                                                 29.1.

Plaquette carrée                                                                                                               29.2.

Rondelle plate à trou carrée                                                                                            29.3.

Plaquette oblique                                                                                                             29.4.

Rondelle élastique simple spire sans becs                                                                      29.5.

Rondelle élastique simple spire abes becs                                                                      29.6.

Rondelle élastique double spire sans becs                                                                      29.7.

Rondelle élastique cintrée                                                                                               29.8.

Rondelle élastique plane à dents chevauchantes extérieures                                           29.9.

Rondelle élastique plane à dents chevauchantes intérieures                                                                                                                                             29.10.

Rondelle élastique concave à dents chevauchantes extérieures                                                                                                                                             29.11.

Rondelle élastique ondulée                                                                                                                                             29.12.

Rondelle élastique plane à dents espacées extérieures                                                                                                                                             29.13.

Rondelle élastique plane à dents espacées intérieures                                                                                                                                             29.14.

Rondelle élasllque concave à dents espacées extérieures                                                                                                                                             29.15.

Frein d’ecrou d’equerre à aileron                                                                                                                                             29.16.

Rondelle frein d’ecrou à ergot extérieur                                                                                                                                             29.17.

Frein d’ecrou droit à aileron                                                                                                                                             29.18.

Rondelle frein d’ecrou à ergot intérieur                                                                                                                                             29.19.

Goupille cylirndrique fendue                                                                                           30.

ÈÍÔÎÐÌÀÖÈÎÍÍÛÅ ÄÀÍÍÛÅ

1. ÐÀÇÐÀÁÎÒÀÍ È ÂÍÅÑÅÍ Ìèíèñòåðñòâîì ÷åðíîé ìåòàëëóðãèè ÑÑÑÐ

ÐÀÇÐÀÁÎÒ×ÈÊÈ

Á.Ì. Ðèãìàíò; Ò.Å. Þð÷åíêî

2. ÓÒÂÅÐÆÄÅÍ È ÂÂÅÄÅÍ Â ÄÅÉÑÒÂÈÅ Ïîñòàíîâëåíèåì Ãîñóäàðñòâåííîãî êîìèòåòà ÑÑÑÐ ïî ñòàíäàðòàì îò 30.09.86 ¹ 2941

3. Ñðîê ïðîâåðêè 2000 ã., ïåðèîäè÷íîñòü ïðîâåðêè - 10 ëåò

4. Ñòàíäàðò ïîëíîñòüþ ñîîòâåòñòâóåò ñòàíäàðòó ÑÒ ÑÝÂ 6300-88

5. Ñòàíäàðò ïîëíîñòüþ ñîîòâåòñòâóåò ìåæäóíàðîäíîìó ñòàíäàðòó ÈÑÎ 1891-79

6. ÂÂÅÄÅÍ ÂÏÅÐÂÛÅ

7. ÑÑÛËÎ×ÍÛÅ ÍÎÐÌÀÒÈÂÍÎ-ÒÅÕÍÈ×ÅÑÊÈÅ ÄÎÊÓÌÅÍÒÛ

Îáîçíà÷åíèå ÍÒÄ, íà êîòîðûé äàíà ññûëêà

Íîìåð ïóíêòà

ÃÎÑÒ 11708-82

Ââîäíàÿ ÷àñòü

8. ÏÅÐÅÈÇÄÀÍÈÅ ìàðò 1990 ã. ñ Èçìåíåíèåì ¹ 1, óòâåðæäåííûì â èþíå 1989 (ÈÓÑ 11-89)

ÑÎÄÅÐÆÀÍÈÅ

Àëôàâèòíûé óêàçàòåëü òåðìèíîâ íà ðóññêîì ÿçûêå. 4

Àëôàâèòíûé óêàçàòåëü òåðìèíîâ íà íåìåöêîì ÿçûêå. 5

Àëôàâèòíûé óêàçàòåëü òåðìèíîâ íà àíãëèéñêîì ÿçûêå. 5

Àëôàâèòíûé óêàçàòåëü òåðìèíîâ íà ôðàíöóçñêîì ÿçûêå. 6

Ïðèëîæåíèå Òåðìèíîëîãèÿ è íîìåíêëàòóðà êðåïåæíûõ èçäåëèé íà ðóññêîì, íåìåöêîì, àíãëèéñêîì è ôðàíöóçñêîì ÿçûêàõ. 6

I. Òåðìèíîëîãèÿ è íîìåíêëàòóðà êðåïåæíûõ èçäåëèé. 6

1. Ðåçüáà. 6

2. Ôîðìû ãîëîâîê. 7

3. Ôîðìû ñòåðæíåé. 9

4. Êîíöû áîëòîâ è âèíòîâ. 10

5. Ýëåìåíòû, ïåðåäàþùèå âðàùåíèå. 11

6. Áîëòû è âèíòû ñ øåñòèãðàííîé ãîëîâêîé. 12

7. Âèíòû ñ ÷åòûðåõãðàííîé (êâàäðàòíîé) ãîëîâêîé. 13

8. Áîëòû ñ òðåõãðàííîé ãîëîâêîé. 13

9. Áîëòû ñ âîñüìèãðàííîé ãîëîâêîé. 13

10. Áîëòû ñ äâåíàäöàòèãðàííîé ãîëîâêîé. 13

11. Áîëòû ñ ò-îáðàçíîé ãîëîâêîé. 13

12. Áîëòû ñ ïîëóêðóãëîé ãîëîâêîé. 14

13. Áîëòû ñ ïîòàéíûìè ãîëîâêàìè. 14

14. Âèíòû ñ âíóòðåííèì øåñòèãðàííèêîì.. 14

15. Âèíòû ñ ïðÿìûì øëèöåì.. 14

16. Âèíòû ñ êðåñòîîáðàçíûì øëèöåì.. 15

17. Âèíòû ñ íåâûïàäàþùèìè äåòàëÿìè. 15

18. Ðàçëè÷íûå òèïû áîëòîâ è âèíòîâ. 16

19. Óñòàíîâî÷íûå âèíòû áåç ãîëîâîê. 17

20. Ñàìîíàðåçàþùèå âèíòû.. 17

21. Øóðóïû.. 17

22. Ðåçüáîíàðåçàþùèå âèíòû.. 18

23. Ðåçüáîâûäàâëèâàþùèå âèíòû.. 18

24. Âèíòû ñ ðèôëåíîé ãîëîâêîé. 18

25. Øòèôòû.. 19

26. Øïèëüêè. 20

27. Çàêëåïêè. 20

28. Ãàéêè. 21

29. Øàéáû.. 23

30. Øïëèíòû.. 25

II. Àëôàâèòíûé óêàçàòåëü òåðìèíîâ è íàèìåíîâàíèé êðåïåæíûõ èçäåëèé íà ðóññêîì ÿçûêå. 25

III. Óêàçàòåëü òåðìèíîâ è íàèìåíîâàíèé êðåïåæíûõ èçäåëèé íà íåìåöêîì ÿçûêå. 31

IV. Óêàçàòåëü òåðìèíîâ è íàèìåíîâàíèé êðåïåæíûõ èçäåëèé íà àíãëèéñêîì ÿçûêå. 36

V. Óêàçàòåëü òåðìèíîâ è íàèìåíîâàíèé êðåïåæíûõ èçäåëèé íà ôðàíöóçñêîì ÿçûêå. 42

 

2008-2013. ÃÎÑÒû, ÑÍèÏû, ÑàíÏèÍû - Íîðìàòèâíûå äîêóìåíòû - ñòàíäàðòû.